آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

NXP MKW41Z512VHT4

Manufacturer	NXP
Mfr. Part Number	MKW41Z512VHT4
Electland Part Code	287490
Electland Part Number	NYE_MKW41Z512VHT4
Category	RF Transceiver ICs
Description	IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v4.2 2.4GHz 64-VFLGA

Product Attributes

Category	RF and Wireless RF Transceiver ICs
type	transceiver
RF Family/Standard	802.15.4, Bluetooth
Protocol	Bluetooth v4.2
Modulation	FSK, GFSK, MSK, O-QPSK
Frequency	2.4GHz
Data Rate (Max)	1Mbps
Power - Output	3.5dBm
Sensitivity	-100dBm
Memory Size	512kB Flash, 128kB RAM
Serial Interfaces	I2C, SPI, UART
Voltage - Supply	900mV~4.2V
Current - Receiving	6.2mA
Current - Transmitting	6mA
Operating Temperature	-40℃~+105℃
Mounting Type	Surface Mount
Package / Case	64-VFLGA
Supplier Device Package	64-VFLGA (7x7)
Interface Type	SPI;I2C
Frequency Range	2.36GHz~2.4835GHz
Output Power	3.5dBm
Receive Current	6.8mA
Data Rate	1Mbps
Current Of Transmitting	6.1mA
Typical Application Frequency	2.4GHz
Packaging	QFN-48-EP(7x7)
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	5A992C
HtsusCode	8542.39.0010
Weight	0.0005g

Features

2.4 GHz Bluetooth Low Energy ver. 4.2 compliant supporting up to 2 simultaneous hardware connections
IEEE Std. 802.15.4 compliant with dual-PAN support
Generic FSK modulation
Data Rate: 250, 500 and 1000 kbps
Modulations: GFSK BT = 0.3, 0.5, 0.7; FSK/MSK
Modulation Index: 0.32, 0.5, or 0.7
Typical Receiver Sensitivity (BLE) = -95 dBm
Typical Receiver Sensitivity (802.15.4) = -100 dBm
Typical Receiver Sensitivity (250 kbps GFSK-BT = 0.5, h = 0.5) = -100 dBm
Prog Transmitter Output Power: -30 dBm to 3.5 dBm
Low external component counts for low cost application
On-chip balun with single ended bidirectional RF port
Up to 48 MHz ARM Cortex-M0+ core
On-chip 512/256 KB Flash memory
On-chip 128/64 KB SRAM
Transceiver current (DC-DC buck mode, 3.6 V supply)
Typical Rx Current: 6.8 mA
Typical Tx current: 6.1 mA (0 dBm output)
Low Power Mode (VLLS0) Current: 182 nA
Nine MCU low-power modes to provide power optimization based on application requirements
DC-DC Converter supporting Buck, Boost, and Bypass operating modes
Direct memory access(DMA) Controller
Computer operating properly(COP) watchdog
Serial wire debug(SWD) Interface and Micro Trace buffer
Bit Manipulation Engine (BME)
16-bit Analog-to-Digital Converter (ADC)
12-bit Digital-to-Analog Converter (DAC)
6-bit High Speed Analog Comparator (CMP)
1.2 V voltage reference (VREF)
16-bit low-power timer (LPTMR)
3 Timers Modules(TPM): One 4 channel TPM and two 2 channel TPMs
Programmable Interrupt Timer (PIT)
Real-Time Clock (RTC)
2 serial peripheral interface (SPI) modules
2 inter-integrated circuit (I2C) modules
26 and 32 MHz supported for BLE and FSK modes
32 MHz supported for IEEE Standard 802.15.4
32.768 kHz Crystal Oscillator
Voltage range: 0.9 V to 4.2 V
Temperature range: -40 to 105 ℃ (Laminate-QFN); -40 to 85 ℃ (WLCSP)
Touch sensing input
General-purpose input/output
Low Power UART module
Carrier Modulator Timer (CMT)
AES-128 Hardware Accelerator (AESA)
True Random Number Generator (TRNG)
Advanced flash security
80-bit unique identification number per chip
40-bit unique media access control (MAC) subaddress
Bluetooth-LE v4.2 Secure Connections
IEEE Standard 802.15.4-2011 compliant security