آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The Gecko Bluetooth Low Energy family of SoCs is part of the Wireless Gecko portfolio. These Gecko SoCs are ideal for enabling energy-friendly Bluetooth 5 networking for IoT devices. The single-die solution provides industry-leading energy efficiency, ultra-fast wakeup times, a scalable power amplifier, an integrated balun and no-compromise MCU features.

Features

• 32-bit ARM Cortex-M4 core with 40 MHz maximum operating frequency
• Up to 1 MB of flash and 256 kB of RAM
• Pin-compatible across EFR32BG families (exceptions apply for 5V-tolerant pins)
• 12-channel Peripheral Reflex System, Low-Energy Sensor Interface & Multichannel Capacitive Sense Interface
• Autonomous Hardware Crypto Accelerator and True Random Number Generator
• Integrated PA with up to 19 dBm (2.4 GHz) or 20 dBm (Sub-GHz) TX power
• Integrated balun for 2.4 GHz
• Robust peripheral set and up to 65 GPIO
• High Performance 32-bit 40 MHz ARM Cortex-M4 with DSP instruction and floating-point unit for efficient signal processing
• Embedded Trace Macrocell (ETM) for advanced debugging
• 2.4 GHz and Sub-GHz radio operation
• Supported Modulation Formats: 2/4 (G)FSK with fully configurable shaping, BPSK / DBPSK TX, OOK / ASK, Shaped OQPSK / (G)MSK, Configurable DSSS and FEC
• Supported Protocols: Bluetooth Low Energy (Bluetooth 5), Proprietary Protocols, Wireless M-Bus, Selected IEEE 802.15.4g SUN-FSK PHYs, Low Power Wide Area Networks
• Suitable for Systems Targeting Compliance With: FCC Part 90.210 Mask D, FCC part 15.247, 15.231, 15.249, ETSI Category I Operation, EN 300 220, EN 300 328, ARIB T-108, T-96, China regulatory
• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)
• 2x Analog Comparator (ACMP)
• 2x Digital to Analog Converter (VDAC)
• 3x Operational Amplifier (Opamp)
• Digital to Analog Current Converter (IDAC)
• Low-Energy Sensor Interface (LESENSE)
• Multi-channel Capacitive Sense Interface (CSEN)
• Up to 54 pins connected to analog channels (APORT) shared between analog peripherals
• Up to 65 General Purpose I/O pins with output state retention and asynchronous interrupts
• 8 Channel DMA Controller
• 12 Channel Peripheral Reflex System (PRS)
• 2x16-bit Timer/Counter, 3 or 4 Compare/Capture/PWM channels
• 2x32-bit Timer/Counter, 3 or 4 Compare/Capture/PWM channels
• 32-bit Real Time Counter and Calendar
• 16-bit Low Energy Timer for waveform generation
• 32-bit Ultra Low Energy Timer/Counter for periodic wake-up from any Energy Mode
• 3x16-bit Pulse Counter with asynchronous operation
• 2x Watchdog Timer with dedicated RC oscillator
• 4x Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)
• Low Energy UART (LEUART)
• 2xI²C interface with SMBus support and address recognition in EM3 Stop
• 1.8 to 3.8 single power supply
• Integrated DC-DC, down to 1.8 output with up to 200 mA load current for system
• Standard (-40 °C to 85 °C) and Extended (-40 °C to 125 °C) temperature grades available
• General Purpose CRC
• True Random Number Generator
• 2x Hardware Cryptographic Acceleration for AES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC
• QFN48 7x7 mm Package
• QFN68 8x8 mm Package
• BGA125 7x7 mm Package

Applications

• IoT Sensors and End Devices
• Health and Wellness
• Home and Building Automation
• Accessories
• Human Interface Devices
• Metering
• Commercial and Retail Lighting and Sensing