ارسال سریع به سراسر ایران پشتیبانی 24/7
MAXIM MAX2832ETM+

آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

MAXIM MAX2832ETM+

Manufacturer MAXIM
Mfr. Part Number MAX2832ETM+
Electland Part Code 286337
Electland Part Number NYE_MAX2832ETM+
Category RF Transceiver ICs
Description IC RF TxRx Only WiFi 802.11b/g 2.4GHz ~ 2.5GHz 48-WFQFN Exposed Pad
Datasheet Download

Product Attributes

Category RF and Wireless RF Transceiver ICs
type TxRx Only
RF Family/Standard WiFi
Protocol 802.11b/g
Modulation CCK, OFDM, QPSK
Frequency 2.4GHz ~ 2.5GHz
Data Rate (Max) 54Mbps
Power - Output 21dBm
Sensitivity -76dBm
Serial Interfaces SPI
Voltage - Supply 2.7V~3.6V
Current - Receiving 62mA ~ 78mA
Current - Transmitting 82mA ~ 104mA
Operating Temperature -40℃~+85℃
Mounting Type Surface Mount
Package / Case 48-WFQFN Exposed Pad
Supplier Device Package 48-TQFN (7x7)
Interface Type SPI
Frequency Range 2.4GHz~2.5GHz
Features Supports RSSI function
Output Power 21dBm
Receive Current 62mA
Data Rate 54Mbps
Current Of Transmitting 82mA
Packaging TQFN-48(7x7)
Tariff Active False
ReachStatus REACH Unaffected
RohsStatus ROHS3 Compliant
MoistureSensitivityLevel 1 (Unlimited)
HtsusCode 8542.39.0010
Weight 0.5g

Introduction

The MAX2831/MAX2832 direct conversion, zero-IF, RF transceivers are designed specifically for 2.4GHz to 2.5GHz 802.11g/b WLAN applications. The MAX2831 completely integrates all circuitry required to implement the RF transceiver function, providing an RF power amplifier (PA), RF-to-baseband receive path, baseband-to-RF transmit path, VCO, frequency synthesizer, crystal oscillator, and baseband/control interface. The MAX2832 integrates the same functional blocks except for the PA. Both devices include a fast-settling sigma-delta RF synthesizer with smaller than 20Hz frequency steps and a digitally tuned crystal oscillator allowing use of a low-cost crystal. The devices also integrate on-chip DC-offset cancellation and I/Q errors and carrier leakage-detection circuits. Only an RF bandpass filter (BPF), crystal, RF switch, and a small number of passive components are needed to form a complete 802.11g/b WLAN RF frontend solution.

Features

  • 2.4GHz to 2.5GHz ISM Band Operation
  • IEEE 802.11g/b Compatible (54Mbps OFDM and 11Mbps CCK)
  • Complete RF Transceiver, PA, and Crystal Oscillator (MAX2831)
  • Best-in-Class Transceiver Performance
  • 62mA Receiver Current
  • 2.6dB Rx Noise Figure
  • -76dBm Rx Sensitivity (54Mbps OFDM)
  • No I/Q Calibration Required
  • 0.1dB/0.35° Rx I/Q Gain/Phase Imbalance
  • 33dB RF and 62dB Baseband Gain Control Range
  • 60dB Range Analog RSSI per RF Gain Setting
  • Fast Rx I/Q DC-Offset Settling
  • Programmable Baseband Lowpass Filter
  • 20-Bit Sigma-Delta Fractional-N PLL with <20Hz Step Size
  • Digitally Tuned Crystal Oscillator
  • +18.5dBm Transmit Power (5.6% EVM with 54Mbps OFDM)
  • 31dB Tx Gain Control Range
  • Integrated Power Detector (MAX2831)
  • Serial or Parallel Gain-Control Interface
  • 40dB Tx Sideband Suppression without Calibration

  • Tx/Rx I/Q Error Detection
  • Transceiver Operates from +2.7V to +3.6V
  • PA Operates from +2.7V to +4.2V (MAX2831)
  • Low-Power Shutdown Mode
  • Small 48-Pin TQFN Package (7mm x 7mm x 0.8mm)

Applications

  • Wi-Fi
  • PDA
  • VOIP
  • Cellular Handsets
  • Wireless Speakers and Headphones
  • General 2.4GHz ISM Radios

In-Stock Suppliers

NoyanElectronic
0 in stock
Supplier Part Number: NYE_MAX2832ETM+

1 1
QTY USD TOMAN
1+$4.081,132,830 تومان
200+$1.58438,690 تومان
500+$1.53424,810 تومان
1000+$1.5416,480 تومان

Qty in reel: 43pcs/reel