آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The CC1100 is a low-cost sub- 1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300 - 348 MHz, 400 - 464 MHz and 800 - 928 MHz bands. The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data up to 500 kBaud. CC1100 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of CC1100 can be controlled via an SPI interface. In a typical system, the CC1100 will be used together with a microcontroller and a few additional passive components.

Features

• RF Performance
  • High sensitivity (–111 dBm at 1.2 kBaud, 868 MHz, 1% packet error rate)
  • Low current consumption (14.4 mA in RX, 1.2 kBaud, 868 MHz)
  • Programmable output power up to +10 dBm for all supported frequencies
  • Excellent receiver selectivity and blocking performance
  • Programmable data rate from 1.2 to 500 kBaud
  • Frequency bands: 300 - 348 MHz, 400 - 464 MHz and 800 - 928 MHz
• Analog Features
  • 2-FSK, GFSK, and MSK supported as well as OOK and flexible ASK shaping
  • Suitable for frequency hopping systems due to a fast settling frequency synthesizer: 90us settling time
  • Automatic Frequency Compensation (AFC) can be used to align the frequency synthesizer to the received centre frequency
  • Integrated analog temperature sensor
• Digital Features
  • Flexible support for packet oriented systems: On-chip support for sync word detection, address check, flexible packet length, and automatic CRC handling
  • Efficient SPI interface: All registers can be programmed with one “burst” transfer
  • Digital RSSI output
  • Programmable channel filter bandwidth
  • Programmable Carrier Sense (CS) indicator
  • Programmable Preamble Quality Indicator (PQI) for improved protection against false sync word detection in random noise
  • Support for automatic Clear Channel Assessment (CCA) before transmitting (for listen-before-talk systems)
  • Support for per-package Link Quality Indication (LQI)
  • Optional automatic whitening and dewhitening of data
• Low-Power Features
  • 400nA SLEEP mode current consumption
  • Fast startup time: 240us from sleep to RX or TX mode (measured on EM reference design [5] and [6])
  • Wake-on-radio functionality for automatic low-power RX polling
  • Separate 64-byte RX and TX data FIFOs (enables burst mode data transmission)
• General
  • Few external components: Completely onchip frequency synthesizer, no external filters or RF switch needed
  • Green package: RoHS compliant and no antimony or bromine
  • Small size (QLP 4x4 mm package, 20 pins)
  • Suited for systems targeting compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US).
  • Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols

Applications

• Ultra low-power wireless applications operating in the 315/433/868/915 MHz ISM/SRD bands
• Wireless alarm and security systems
• Industrial monitoring and control
• Wireless sensor networks
• AMR – Automatic Meter Reading
• Home and building automation