آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The SR1010 is a digitally programmable UWB wireless transceiver. It transmits in the license-free UWB spectrum from 3.1 - 5.8 GHz by using short impulses that enable highly robust and energy efficient communications. The transceiver allows for the dynamic shaping of its output spectrum to comply with international UWB emission limits or tailor its emissions to a wide range of spectral masks. The circuits are aggressively duty cycled to enable ultra low power operation. The ASIC is composed of an impulse radio with an RF transmitter and receiver, power management unit, sleep counter and digital / baseband hardware. The ASIC communicates over an SPI interface to an MCU running the link layer. The SR1010 can achieve ultra-low power consumption within a wide range of data rates making it a highly versatile solution. It is an excellent solution for wireless applications that benefit from high degrees of energy efficiency, short latency, versatile operation or robust communications.

Features

• UWB Radio Transceiver – 3.1 - 5.8 GHz frequency band 20.48 Mbps symbol rate – 500 MHz to 3 GHz reconfigurable TX bandwidth – Up to 3 dBm/20MHz tunable TX symbol energy – -75 dBm/20MHz RX sensitivity – 100 Ohm differential antenna interface, no matching components required
• Integrated clock management – Only one 32.768 kHz external XTAL required – Always-on real time clock1 – Synthesized 20.48 MHz system clock
• Ultra-low power consumption – 1.8 V - 3.3 V supply voltage – Internal DC-DC converter
• Versatile digital core
  • Up to 50 MHz SPI interface
  • Modem supports OOK modulation, differential encoding, 32-bit sync word, punctured FEC, and 16-bit CRC
  • Independent 1 kbit TX and 1 kbit RX FIFOs
  • 1 kbit NVM memory
• Supply current @3.3V
  • 0.34 mA/Mbps Active RX
  • 0.10 mA/Mbps Active TX
  • 250 uA Idle mode (PLL on, DC-DC on)
  • 41 uA Shallow Sleep mode (PLL on, DC-DC off)
  • 920 nA Deep Sleep mode (PLL off, RTC on)
  • 55 nA Shutdown mode (RTC off, no retention)
• 28 pins, 4 mmx4 mm QFN package for use in compact systems
• Small number of external components required