آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

SILICON LABS WF200C

Manufacturer	SILICON LABS
Mfr. Part Number	WF200C
Electland Part Code	285995
Electland Part Number	NYE_WF200C
Category	RF Transceiver ICs
Description	Circuit Breaker Thermal 20A 240 V AC 60 V DC Rocker Panel Mount
Datasheet	Download

Product Attributes

Category	RF and Wireless RF Transceiver ICs
Sensitivity	-96.5dBm
Voltage - Supply	1.8V~3.3V
Operating Temperature	-40℃~+105℃
Mounting Type	Panel Mount
Interface Type	SDIO;SPI
Features	Supports RSSI function
Number of poles	2
Output Power	16dBm
Receive Current	41.6mA
Data Rate	72.2Mbps
Typical Application Frequency	2.4GHz
Actuator Type	Rocker
Approval Agency	CCC, KC, UL, VDE
Current Rating (Amps)	20A
Voltage Rating - DC	60 V
Voltage Rating - AC	240 V
Breaker Type	Thermal
Packaging	QFN-32(4x4)
Tariff Active	True
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	Not Applicable
ExportControlClassNumber	EAR99
HtsusCode	8536.20.0020
Weight	0.5g

Introduction

The Silicon Labs WF200 is an Ultra Low Power Wi-Fi transceiver or network co-processor (NCP) targeted for applications where optimal RF performance, low-power consumption, and secure end-to-end solution, together with fast time to market, are key requirements. The WF200 integrates the Balun, T/R switch, LNA and PA for best possible RF performance. Co-existence with other external 2.4GHz radios is supported. WF200 has been optimized for resource and power constrained devices at the RF, protocol, and firmware levels. Power conscious devices can take advantage of these features in both active and sleep modes. For security sensitive applications, WF200 provides secure boot and a secure & encrypted host interface. Robust security is made possible with a native integrated True Random Number Generator and OTP memory for confidential encryption key storage. The WF200 fits well with Linux-based and RTOS-based host processors. WF200 supports both the 802.11 lower MAC and the 802.11 full MAC architectures. It communicates with the external host controller over the SPI or SDIO interface.

Features

802.11 b/g/n Wi-Fi NCP including the radio, baseband, MAC, security and host interface
Superior link budget with integrated LNA, PA and Balun
OTP included removing the need for an external EEPROM
Ultra low power optimized solution
End-to-end security with hardware protected secure boot and encrypted host interface (optional)
802.11 split and full MAC architecture support
Complete Network Co-Processor (NCP) support for Linux and RTOS external hosts
1x1 802.11n (20 MHz) with full 802.11 b/g compatibility, 72.2Mbps
Greenfield Tx/Rx for 802.11n optimal performance
Short Guard Interval (SGI) for 802.11n optimal throughput
A-MPDU Rx and Tx for high MAC throughput
Block acknowledgement for several frames
Rx Defragmentation
Roaming supported
Client, SoftAP modes supported
Concurrent AP + STA supported on different channels
Tx Power: +17 dBm
Rx Sensitivity: -96.7 dBm
2x2.4GHz antenna pads for full antenna diversity support or FEM support
2.4GHz co-existence; 2-, 3- and 4-wire PTA support
Integrated Balun, T/R switch, LNA and PA for 2.4GHz
Secure boot with roll-back prevention
Encrypted host interface, dedicated hardware acceleration block
Integrated True Random Number Generator
Secure key storage using protected OTP technology
AES/WEP hardware acceleration
SDIO (1-bit and 4-bit SD mode @ 26MHz)
SPI (1-bit @ 52MHz)
External 32kHz crystal for low power
GPIOs (including wake-up and Tx/Rx activity monitoring)