آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The CC1260 device contains a quadrature RF front end with a digitized baseband signal interface targeting software-defined radio systems. The combination of the CC1260 device and a DSP is tailored for high performance and flexible FSK, OFDM, and DSSS designs (including IEEE 802.15.4g MR-FSK, MR-OFDM, and MR-O-QPSK PHY options). The CC1260 device is designed for excellent performance at very low-power and low-voltage operation in cost-effective wireless systems. The device is mainly intended for the industrial, scientific, and medical (ISM) 863- to 876-MHz and 902- to 930-MHz frequency bands. A typical CC1260-based system design requires only a few external passive components, a DSP (for the digital modem), and a microcontroller (for system control and application). The main operating parameters of the CC1260 device can be controlled using an SPI interface.

Features

• Supported Frequency Bands: 863 to 876 MHz and 902 to 930 MHz
• Wide Supply Voltage Range: 2.3 to 3.6 V
• Temperature Range: -40°C to +105°C
• High-Performance Single-Chip Linear Quadrature RF Transceiver With a Digitized I/Q Interface to a DSP Suitable for Systems Targeting Compliance With: FCC 47 CFR Part 15, ARIB STD-T108, ETSI EN 300 220, ETSI EN 303 204
• Low Current Consumption: RX: 32 mA, TX: 48 mA @ +10 dBm, 42 mA @ +3 dBm, Power Down: <1 μA
• Excellent Phase Noise: -101 dBc/Hz at 10-kHz Offset, -123 dBc/Hz at 1-MHz Offset
• Low Cascaded Receiver Noise Figure: 7 dB
• Industry-Leading RF Coexistence Properties Blocking (3-dB Desensitization): -33 dBm at 10-MHz Offset, -36 dBm at 2-MHz Offset
• High-Performance Linear RF Front End Tailored for All IEEE 802.15.4g PHY Options (MR-FSK, MR-OFDM, MR-O-QPSK [DSSS]) Using the Modulation Formats (G)FSK, O-QPSK, BPSK, QPSK, and 16-QAM
• RF I/Q Up- and Down-Conversion With Digitized Baseband Input and Output Signals
• Fully Integrated High-Performance Frequency Synthesizer and Quadrature LO Signal Generator
• Programmable Output Power up to +13 dBm for Nonlinear Modulation Formats, Such as FSK and up to 3-dBm Average Power for 16-QAM OFDM With Very Fine Step Size
• Receive Gain: 43 dB
• TX Error Vector Magnitude (EVM): -29 dB
• Seamless Parallel Interface to DSP
• RoHS Compliant 7-mm × 7-mm RGZ-48 Package
• Optional Reference Clock Output to Facilitate Single Crystal Wireless System Designs

Applications

• High-Performance, Low-Power, Software-Defined Radio (SDR) Systems at 868-, 915-, and 920-MHz ISM Frequency Bands
• Wireless Smart Grid
• Automated Metering Infrastructure (AMI) and Automatic Meter Reading (AMR)
• Industrial Monitoring and Control Support for All IEEE 802.15.4g PHY Modes