| Manufacturer | AMICCOM Elec |
|---|---|
| Mfr. Part Number | A71X29AQFI/Q |
| Electland Part Code | 285645 |
| Electland Part Number | NYE_A71X29AQFI/Q |
| Category | RF Transceiver ICs |
| Description | -109dBm 250Kbps 315MHz~915MHz 2.2V~3.6V QFN-24-EP(4x4) RF Transceiver ICs RoHS |
| Datasheet | Download |
| Category | RF and Wireless RF Transceiver ICs |
|---|---|
| type | transceiver |
| Sensitivity | -109dBm |
| Voltage - Supply | 2.2V~3.6V |
| Operating Temperature | -40℃~+85℃ |
| Interface Type | SPI |
| Frequency Range | 315MHz~915MHz |
| Features | Automatic response function;Automatic retransmission function;CRC check function;Supports FEC function;Manchester decoding function;Supports RSSI function |
| Output Power | 12dBm |
| Receive Current | 3.8mA |
| Data Rate | 250Kbps |
| Current Of Transmitting | 24mA |
| Packaging | QFN-24-EP(4x4) |
| Weight | 0.0395g |
A7129 is a monolithic low-IF architecture CMOS FSK/GFSK TRX for wireless applications in the 315/433/470/510/868/ 915MHz ISM bands. This device is especially suitable for battery-powered application and the 470MHz ~ 510MHz wireless AMR (Auto Meter Reading) in China and 868.3MHz wireless M-bus in Europe. A7129 is optimized for very low power consumption (i.e. 434MHz band, 3.8mA @ RX mode and 24 mA @ TX mode,10.5dBm). In addition, A7129 can offer a very good link budget with a high efficient class-E power amplifier up to 12 dBm and a low phase noise receiver (- 110 dBm RX sensitivity @ 100Kbps / FSK / 433.92MHz). Therefore, A7129 is very suitable for battery powered application with a nice LOS (line-of-sight) wireless range. A7129 incorporates a baseband modem with the programmable data rate divider from 2K to 250Kbps. For a battery powered system, A7129 supports fast PLL settling time (120 us), Xtal settling time (1100 us) and on-chip Regulator settling time (850 us) to reduce average power consumption. The RF synthesizer contains a VCO and a low noise fractional-N PLL with an output channel frequency resolution of 366 Hz. The VCO frequency operates at to the wanted radio frequency to cover all RF band. Since A7129 is a low-IF architecture TRX with programmable IFBW (IF Filter Bandwidth, 50 KHz/100 KHz/150 KHz/250 KHz), the RXLO shall be configured to offset an intermediate frequency (IF) to TXRF regarding to the IFBW setting. A7129’s control registers are accessed via 3-wire or 4-wire SPI interface including TX/RF FIFO, VCO frequency, to chip calibration procedures.
| QTY | USD | TOMAN |
|---|---|---|
| 1+ | $0.6692 | 185,810 تومان |
| 10+ | $0.5613 | 155,850 تومان |
| 30+ | $0.4933 | 136,970 تومان |
| 100+ | $0.424 | 117,730 تومان |
| 500+ | $0.3927 | 109,030 تومان |
| 1000+ | $0.3789 | 105,200 تومان |