آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

The CC2533 is an optimized system- on- chip (SoC) solution for IEEE 802.15.4 based remote- control systems. It enables single- chip remote controls to be built with low bill- of- material cost when used as a flexible SoC. It also provides a simple path to adding RF4CE capability to a device or target when used in the wireless network processor configuration of the RemoTI™ RF4CE stack. Robust network nodes can be built with very low total bill- of- material costs. The CC2533 combines the excellent performance of a leading RF transceiver with a single- cycle 8051 compliant CPU, up to 96- KB in- system programmable flash memory, up to 6- KB RAM, and many other powerful features. The CC2533 has efficient power modes with RAM and register retention below 1μA making it highly suited for low- duty- cycle systems where ultralow power consumption is required. Short transition times between operating modes further ensure low energy consumption. Combined with the golden- unit- status RemoTI stack from Texas Instruments, the CC2533 provides a robust and complete ZigBee RF4CE remote- control solution. It is also ideal for implementing the target side of a remote- control system in a network processor configuration with an SPI/UART/I2C interface. The CC2533 comes complete with reference designs and example software that implement a remote control system to ensure efficient design- in.

Features

• 2.4-GHz IEEE 802.15.4 Compliant RF Transceiver
• Excellent Receiver Sensitivity and Robustness to Interference
• Programmable Output Power Up to 4.5 dBm
• Boost-Mode TX at 7 dBm
• Very Few External Components
• Only a Single Crystal Needed for Asynchronous Networks
• Space-Saving 6-mm x 6-mm QFN40 Package
• Suitable for Systems Targeting Compliance With Worldwide Radio-Frequency Regulations: ETSI EN 300 328 and EN 300 440 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T-66 (Japan)
• Pin- and Software-Compatible With the CC2530Fxxx Series
• Active-Mode RX (CPU Idle): 25 mA
• Active Mode TX at 0 dBm (CPU Idle): 28.5 mA
• Power Mode 1 (4 μs Wake-Up): 0.2 mA
• Power Mode 2 (Sleep Timer Running): 1 μA
• Power Mode 3 (External Interrupts): 0.5 μA
• Wide Supply-Voltage Range (2 V-3.6 V)
• High-Performance and Low-Power 8051 Microcontroller Core With Code Prefetch
• 64- or 96-KB In-System-Programmable Flash
• 4- or 6-KB RAM With Retention in All Power Modes
• Hardware Debug Support
• Powerful Five-Channel DMA
• IEEE 802.15.4 MAC Timer, General-Purpose Timers (One 16-Bit, Two 8-Bit)
• IR Generation Circuitry
• 32-kHz Sleep Timer With Capture
• CSMA/CA Hardware Support
• Accurate Digital RSSI/LQI Support
• Battery Monitor Comparator
• Random Number Generation
• AES Security Coprocessor
• Two Powerful USARTs With Support for UART and SPI
• I2C Interface
• 23 General-Purpose I/O Pins
• Watchdog Timer
• CC2533 Remote Control Development Kit for RF4CE
• CC2533 Development Kit
• CC2533EMK Evaluation Modules
• SmartRF Software
• Packet Sniffer
• IAR Embedded Workbench Available

Applications

• ZigBee™ RF4CE Remote Control Target and Device
• 2.4-GHz IEEE 802.15.4 Systems Based on TIMAC or SimpliciTI™ Network Protocol
• Consumer Electronics
• Electronic Shelf Labeling