ارسال سریع به سراسر ایران پشتیبانی 24/7
TI IWR1843ARQGALPR

آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

TI IWR1843ARQGALPR

Manufacturer TI
Mfr. Part Number IWR1843ARQGALPR
Electland Part Code 285239
Electland Part Number NYE_IWR1843ARQGALPR
Category RF Transceiver ICs
Description IC RF TxRx + MCU RADAR 76GHz ~ 81GHz 180-VFBGA, FCBGA Exposed Pad
Datasheet Download

Product Attributes

Category RF and Wireless RF Transceiver ICs
type TxRx + MCU
RF Family/Standard RADAR
Frequency 76GHz ~ 81GHz
Data Rate (Max) 900Mbps
Power - Output 16dBm
Memory Size 2MB RAM
Serial Interfaces GPIO, I2C, JTAG, PWM, SPI, UART
GPIO 47
Voltage - Supply 1.14V ~ 1.32V
Operating Temperature -40°C ~ 125°C (TC)
Mounting Type Surface Mount
Package / Case 180-VFBGA, FCBGA Exposed Pad
Supplier Device Package 180-FCBGA (15x15)
Features Auto calibration;Integrated ADC;Self-test function
Packaging FCBGA-180
Tariff Active False
ReachStatus REACH Unknown
RohsStatus Unknown
HtsusCode 8542.39.0010
Weight 0.15g

Introduction

The IWR1843AOP device is an integrated single-chip millimeter-wave sensor capable of operating in the 76 GHz to 81 GHz frequency band and based on FMCW radar technology, with continuous linear frequency modulation pulses of up to 4 GHz. This device is manufactured using a low-power 45 nm RFCMOS process, enabling excellent integration in an ultra-small package. The IWR1843AOP is an ideal solution for low-power, self-monitoring, and ultra-precise radar systems in industrial applications such as building automation, factory automation, drones, material handling, traffic monitoring, and surveillance.

The IWR1843AOP device is a self-contained single-chip solution that simplifies the implementation of millimeter-wave sensors in the 76 GHz to 81 GHz frequency band. The IWR1843AOP includes a monolithic implementation of a 3TX, 4RX system with a built-in PLL and ADC converter. The IWR1843AOP also integrates a DSP subsystem, which includes a high-performance C674x DSP for radar signal processing. This device contains a processor subsystem based on ARM R4F, which is responsible for front-end configuration, control, and calibration. Simple programming model changes can support various sensor implementations and enable dynamic reconfiguration to achieve multi-mode sensors. The Hardware Accelerator Block (HWA) can perform radar processing and helps save MIPS on the DSP with more advanced algorithms. In addition, this device is provided as a complete platform solution, which includes reference designs, software drivers, example configurations, API guides, training, and user documentation.

Features

  • FMCW transceiver
    • Antenna-on-Package (AOP) integrating 4 receivers and 3 transmitters
    • Integrated PLL, transmitter, receiver, baseband, and ADC
    • 76GHz to 81GHz coverage with 4GHz usable bandwidth
    • Fractional-N PLL-based ultra-precise chirp engine
    • TX EIRP: 16dBm
    • RX effective isotropic noise figure: 10dB (76 to 81GHz)
    • Phase noise at 1MHz offset: -95dBc/Hz (76 to 77GHz), -93dBc/Hz (77 to 81GHz)
  • Built-in calibration and self-test (monitoring)
  • Arm Cortex-R4F-based radio control system
    • Built-in firmware (ROM)
    • System with self-calibration for process and temperature
  • C674x DSP for FMCW signal processing
  • On-chip memory: 2MB RAM
  • Arm Cortex-R4F MCU for object tracking and classification, and interface control
  • Autonomous mode support (user application loaded from QSPI flash)
  • Host interfaces
    • CAN (two instances, one of which is CAN-FD)
    • Additional interfaces for user applications
      • Up to 6 general-purpose ADC channels
      • Up to 2 SPI ports
      • Up to 2 UARTs
      • I²C
      • GPIO
      • Dual-channel LVDS interface for raw ADC data and debug instrumentation
  • Device security (on select device variants)
    • Authenticated and encrypted secure boot support
    • Customer-programmable root key with key revocation, symmetric key (256-bit), asymmetric key (up to RSA-2K)
    • Crypto hardware accelerators — PKA, AES (up to 256-bit), SHA (up to 256-bit), TRNG/DRGB
  • Targeted at SIL-2 functional safety compliance
  • IWR1843AOP advanced features
    • Embedded self-monitoring without host processor
    • Complex baseband architecture
    • Embedded interference detection
    • Programmable phase rotator in TX path for beamforming
  • Power management
    • Integrated LDO network for enhanced PSRR
    • I/O dual-voltage support: 3.3V/1.8V
  • Clock sources
    • External oscillator at 40MHz
    • Externally driven clock at 40MHz (square wave/sine wave)
    • 40MHz crystal with load capacitors
  • Ease of hardware design
    • 0.8mm pitch, 180-pin, 15mm×15mm flip-chip BGA (ALP) package for easy assembly and low-cost PCB design
    • Compact solution size
  • Operating conditions
    • Junction temperature range: -40°C to 125°C

Applications

  • Automatic doors
  • Motion detectors
  • Industrial sensors for distance, speed, and angle measurement
  • Liquid tank level detection radar
  • Displacement sensing
  • Traffic monitoring
  • Proximity sensing
  • Security and surveillance
  • Factory automation safety guards
  • Level transmitters
  • Electric bicycles
  • Parking barrier gates
  • Off-road vehicle sensors
  • Kick electric scooters
  • Self-balancing personal transporters

In-Stock Suppliers

NoyanElectronic
4 in stock
Supplier Part Number: NYE_IWR1843ARQGALPR

1 1
QTY USD TOMAN
1+$24.576,821,960 تومان
30+$23.536,533,200 تومان

Qty in reel: 1000pcs/reel