آر اف (فرکانس رادیویی) و بی‌سیم آی سی‌ فرستنده‌گیرنده آر اف

Product Attributes

Introduction

ESP32-C6 is a SoC supporting 2.4GHz Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Thread 1.3, integrating a high-performance RISC-V 32-bit processor and a low-power RISC-V 32-bit processor, Wi-Fi, Bluetooth LE, 802.15.4 baseband and MAC, RF module, and peripherals. Wi-Fi, Bluetooth, and 802.15.4 coexist and share a single antenna.

Features

• Wi-Fi operates in the 2.4 GHz band, 1T1R, with working channel center frequency range of 2412~2484 MHz, supports IEEE 802.11ax protocol, 20 MHz non-AP mode only, MCS0~MCS9, supports uplink and downlink OFDMA for multi-user concurrent transmission in high-density applications, supports downlink MU-MIMO, beamformee, CQI, DCM, spatial multiplexing, TWT, fully compatible with IEEE 802.11b/g/n protocols, supports 20 MHz and 40 MHz bandwidth, data rate up to 150 Mbps, supports WMM, frame aggregation, immediate block ACK, fragmentation and reassembly, TXOP, automatic Beacon monitoring, 4 virtual Wi-Fi interfaces, supports infrastructure network Station mode, SoftAP mode, Station + SoftAP mode, and promiscuous mode, with antenna diversity and 802.11mc FTM
• Bluetooth supports BLE, certified for Bluetooth 5.3, supports Bluetooth mesh, high-power mode (20 dBm), data rates: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps, supports advertising extension, multiple advertising, channel selection, power control; Wi-Fi and Bluetooth coexistence sharing the same antenna
• IEEE 802.15.4 compliant with IEEE 802.15.4-2015, operates in the 2.4 GHz band, supports OQPSK PHY, data rate 250 Kbps, supports Thread 1.3 and Zigbee 3.0
• CPU and memory: high-performance RISC-V processor up to 160 MHz, 4-stage pipeline, CoreMark score 464.36 CoreMark; 2.90 CoreMark/MHz (160 MHz); low-power RISC-V processor up to 20 MHz, 2-stage pipeline; L1 cache 32 KB, ROM 320 KB, HP SRAM 512 KB, LP SRAM 16 KB, supports SPI, Dual SPI, Quad SPI, QPI interfaces for connecting multiple external flash and other SPI devices, cache-accelerated flash access, supports in-circuit flash programming, general-purpose DMA controller with 3 receive and 3 transmit channels, event-task matrix, 52-bit system timer, 2× 54-bit general-purpose timers, 3 digital watchdog timers, analog watchdog timer
• Advanced peripheral interfaces: 30 GPIOs (QFN40) or 22 GPIOs (QFN32), 5 strapping pins, 6 pins for on-package flash connection
• Analog interfaces: 12-bit SAR ADC, up to 7 channels, temperature sensor
• Digital interfaces: 2× UART, low-power UART, 2× SPI for flash, general-purpose SPI, I2C, low-power I2C, I2S, pulse count controller, USB serial/JTAG controller, 2× TWAI controllers compatible with ISO 11898-1 (CAN Specification 2.0), SDIO 2.0 slave controller, LED PWM controller up to 6 channels, MCPWM, IR remote controller, parallel IO interface
• Power management: precise power control via clock frequency selection, duty cycling, Wi-Fi operating mode, and individual internal component power gating; four power modes designed for typical scenarios: Active, Modem-sleep, Light-sleep, Deep-sleep; power consumption as low as 7 μA in Deep-sleep mode; LP memory remains active in Deep-sleep mode
• Security: secure boot, access permission control for internal and external memory, flash encryption, encrypted/decrypted memory, 4096-bit OTP with up to 1792 bits available to users, TEE controller and access (address) permission management, cryptographic hardware accelerators: AES-128/256 (FIPS PUB 197), ECC, HMAC, RSA, SHA (FIPS PUB 180-4), digital signature, off-chip memory encryption/decryption, random number generator
• RF: antenna switch, RF balun, PA, LNA; 802.11b TX power up to +21 dBm; 802.11ax TX power up to +19.5 dBm; BLE receiver sensitivity (125 Kbps) up to -106 dBm

Applications

• Smart Home
• Industrial Automation
• Healthcare
• Consumer Electronics
• Smart Agriculture