آر اف (فرکانس رادیویی) و بی‌سیم گیرندهٔ آر‌اف

ST STA8089FG

Manufacturer	ST
Mfr. Part Number	STA8089FG
Electland Part Code	281052
Electland Part Number	NYE_STA8089FG
Category	RF Receivers
Description	- RF Receiver BeiDou, Galileo, GLONASS, GNSS, GPS 1.561GHz, 1.575GHz, 1.601GHz -162dBm 12Mbps PCB, Surface Mount 56-VFQFPN (7x7)
Datasheet	Download

Product Attributes

Category	RF and Wireless RF Receivers
Frequency	1.561GHz, 1.575GHz, 1.601GHz
Sensitivity	-162dBm
Data Rate (Max)	12Mbps
Modulation or Protocol	BeiDou, Galileo, GLONASS, GNSS, GPS
Applications	General Purpose
Data Interface	I2C, SPI, UART
Memory Size	256kB SRAM, 512kB ROM
Antenna Connector	PCB, Surface Mount
Features	Supports software reset;Power-on reset function;Power-off reset function
Voltage - Supply	1.08V ~ 1.32V
Operating Temperature	-40℃~+85℃
Mounting Type	Surface Mount
Package / Case	56-VFQFN Exposed Pad
Supplier Device Package	56-VFQFPN (7x7)
Packaging	VFQFPN-56(7x7)
Tariff Active	False
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	PENDING ECCN
HtsusCode	0000.00.0000
Weight	0.0005g

Introduction

STA8089FG belongs to Teseo III family products. The device is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS). The device is backward compatible with STA8088FG, this enables fast customer application migration. The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output with no need of external memories. STA8089FGBD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.

Features

STMicroelectronics positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems
ST-DRAW (Dead Reckoning Automotive Way) supported (STA8089FGBD only)
Pin to pin compatible with STA8088FG
Single die standalone receiver embedding RF Front-End and low noise amplifier
-162 dBm indoor sensitivity (tracking mode)
Fast TTFF < 1 s in Hot start and 30 s in Cold Start
High performance ARM946 MCU (up to 196 MHz)
256 Kbyte embedded SRAM
In-package SQI Flash Memory (16 Mbits)
Real Time Clock (RTC) circuit
32-bit Watch-dog timer
3 UARTs
1 I²C master interface
1 Synchronous Serial Port (SSP, Motorola-SPI supported)
USB2.0 full speed (12 MHz) with integrated physical layer transceiver
2 Controller Area Network (CAN)
2 channels ADC (10 bits)