آر اف (فرکانس رادیویی) و بی‌سیم سایر آی سی‌ و ماژول‌های آر اف

Product Attributes

Introduction

The 11C91 is a high-speed prescaler designed specifically for communication and instrumentation applications. The 11C91 will divide by 5 or 6. The division ratio is controlled by the Mode Control. The divide by 5 or 6 capability allows the use of pulse swallowing techniques to control high-speed counting modulos by lower-speed circuits. The 11C91 may be used with either ECL or TTL power supplies. In addition to the ECL outputs Q and Q, the 11C91 contains an ECL-to-TTL converter and a TTL output. The TTL output operates from the same VCC and VEE levels as the counter, but a separate pin is used for the TTL circuit VEE. This minimizes noise coupling when the TTL output switches and also allows power consumption to be reduced by leaving the separate VEE pin open if the TTL output is not used. To facilitate capacitive coupling of the clock signal, a 400 ohm resistor (VREF) is connected internally to the VBB reference. Connecting this resistor to the Clock Pulse input (CP) automatically centers the input about the switching threshold. Maximum frequency operation is achieved with a 50% duty cycle. Each of the Mode Control inputs is connected to an internal 2k ohm resistor with the other end uncommitted (RM1 and RM2). An M input can be driven from a TTL circuit operating from the same VCC by connecting the free end of the associated 2k ohm resistor to VCCA. When an M input is driven from the ECL circuit, the 2k ohm resistor can be left open or, if required, can be connected to VEE to act as a pull-down resistor.