آر اف (فرکانس رادیویی) و بی‌سیم سایر آی سی‌ و ماژول‌های آر اف

MAXIM MAX2620EUA+

Manufacturer	MAXIM
Mfr. Part Number	MAX2620EUA+
Electland Part Code	277259
Electland Part Number	NYE_MAX2620EUA+
Category	RF Misc ICs and Modules
Description	RF IC RF Oscillator Cellular, NPCS, WSM 10MHz ~ 1GHz Buffered Outputs 8-uMAX/uSOP
Datasheet	Download

Category	RF and Wireless RF Misc ICs and Modules
function	RF Oscillator
Frequency	10MHz ~ 1GHz
RF Type	Cellular, NPCS, WSM
Secondary Attributes	Buffered Outputs
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package	8-uMAX/uSOP
Frequency Range	10MHz~1GHz
Features	Supports hardware frequency modulation
Applications	Mobile Phone;NPCS;WSM
Packaging	MSOP-8
Tariff Active	False
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	1 (Unlimited)
ExportControlClassNumber	EAR99
HtsusCode	8542.39.0090
Weight	0.059g

The MAX2620 combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small μMAX package.
This device integrates functions typically achieved with discrete components.
The oscillator exhibits low-phase noise when properly mated with an external varactor-tuned resonant tank circuit.
Two buffered outputs are provided for driving mixers or prescalers.
The buffers provide load isolation to the oscillator and prevent frequency pulling due to load-impedance changes.
Power consumption is typically just 27mW in operating mode (VCC = 3.0V), and drops to less than 0.3μW in standby mode.
The MAX2620 operates from a single +2.7V to +5.25V supply.
Low-Phase-Noise Oscillator: -110dBc/Hz (25kHz offset from carrier) Attainable
Operates from Single +2.7V to +5.25V Supply
Low-Cost Silicon Bipolar Design
Two Output Buffers Provide Load Isolation
Insensitive to Supply Variations
Low, 27mW Power Consumption (VCC = 3.0V)
Low-Current Shutdown Mode: 0.1μA (typ)