آر اف (فرکانس رادیویی) و بیسیم فرانتاند آراف (الانای و پیای)
ZHONGKEWEI AT2402E
| Manufacturer | ZHONGKEWEI |
|---|---|
| Mfr. Part Number | AT2402E |
| Electland Part Code | 276810 |
| Electland Part Number | |
| Category | RF Front End (LNA + PA) |
| Description | RF Diode Schottky - Single 4V 110 mA 100 mW PG-TSSLP-2-3 |
| Datasheet | Download |
Product Attributes
| Category | RF and Wireless RF Front End (LNA + PA) |
|---|---|
| Features | Integrated power amplifier;Integrated low noise amplifier;Integrated RF switch;Integrated RF filter;Integrated power detector |
| Package / Case | 0201 (0603 Metric) |
| Supplier Device Package | PG-TSSLP-2-3 |
| Operating Temperature | -40℃~+85℃ |
| Voltage - Supply | 2V~3.6V |
| Frequency Range | 2.4GHz~2.5GHz |
| Current - Max | 110 mA |
| Quiescent Current | 1uA |
| Applications | 802.11b;802.11g;802.11n;802.11ac |
| Output return loss(Receive) | -12dB |
| Input return loss(Transmit) | -24dB |
| Output return loss(Transmit) | -15dB |
| Input return loss(Receive) | -12dB |
| P1dB(Transmit) | 25dBm |
| Power Dissipation (Max) | 100 mW |
| Capacitance @ Vr, F | 0.2pF @ 0V, 1MHz |
| Diode Type | Schottky - Single |
| Voltage - Peak Reverse (Max) | 4V |
| Packaging | QFN-16-EP(3x3) |
| Tariff Active | False |
| ReachStatus | REACH Unaffected |
| RohsStatus | Unknown |
| MoistureSensitivityLevel | Vendor Undefined |
| ExportControlClassNumber | EAR99 |
| HtsusCode | 8541.10.0070 |
| Weight | 0.035g |
Introduction
AT2402E is a single-chip RF front-end integrating transceiver functions for wireless communications. The chip integrates all required RF circuit modules at a very high level of integration, including a PA, LNA, and TX/RX mode switching control circuit. A simple low-voltage control logic circuit is integrated on-chip, enabling the chip's operating mode to be controlled using the lower baseband voltage available within the host system. RF impedance matching circuits for the antenna port, TX port, and RX port are built into the chip, eliminating the need to redesign the peripheral impedance matching network. Necessary harmonic filtering circuits are also integrated on-chip, removing the need for complex external filters, which greatly reduces application solution complexity and improves chip performance. In addition, the chip integrates a power detection circuit that accurately tracks output power variations and outputs a corresponding voltage signal.
AT2402E is primarily designed for wireless communication systems operating at 2.4GHz and compliant with the 802.11b/g/n/ac protocol. Implemented in CMOS process technology, AT2402E achieves very low cost while delivering excellent RF performance — including high power gain, TX linearity, and TX efficiency in transmit mode, as well as an extremely low noise figure in receive mode. Thanks to the outstanding cost-performance ratio of AT2402E, the chip provides an ideal RF transceiver front-end solution for single-antenna wireless communication applications.
Features
- Single-chip RF front-end for 2.4GHz applications
- Separate TX and RX ports with single-antenna architecture
- Built-in low-pass filter and harmonic filter in PA stage
- Integrated LNA and T/R mode switch control circuit
- Excellent PA linearity supporting OFDM and CCK modulated signals
- Integrated output power detection circuit for power monitoring and control
- Logic control voltage compatible with wide voltage range from low voltage to VDD
- Excellent ESD protection on all ports
- All RF ports internally referenced to ground potential
- Integrated RF signal bypass circuit on all power supply ports
- Very low noise figure and high power handling capability in RX mode
- Ultra-low DC quiescent power consumption
- Very low operating current in TX mode
- Fully integrated 50Ω impedance matching on all RF I/O ports
- Minimal external components required
- Fabricated exclusively in reliable CMOS process
- 16-pin QFN package (3×3×0.55mm)
Applications
- 802.11b/g/n/ac multimedia device applications
- 802.11b/g/n/ac smart home applications
- 802.11b/g/n/ac wireless communication network platforms
- 2.4GHz industrial automation
- Other 2.4GHz wireless access systems
