رله‌ رله‌های سیگنال

Product Attributes

Features

• DPDT, current range from low level to 1.0 ampere (sensitive type, 60 mW coil operating power at 25°C)
• Load ratings: High level (relay case grounded): resistive load, 1.0A at 28V DC; 115V AC at 60 and 400 Hz, 250 mA ungrounded case, 100 mA grounded case; inductive load, 0.2A at 28V DC with 0.32H inductance; lamp load, 0.10A at 28V DC; low level, 10 to 50 µA, 10 to 50 mV DC or AC peak; intermediate current applicable
• Contact resistance or voltage drop: initial maximum 0.10 ohm (maximum 0.125 ohm with extended mounting pad); high level, not to exceed 5% of open circuit voltage during life, maximum 0.20 ohm after life (maximum 0.225 ohm with extended mounting pad); low level, maximum 33 ohm during life, maximum 0.15 ohm after life (maximum 0.175 ohm with extended mounting pad); intermediate current, maximum 1 ohm during life, maximum 0.20 ohm after life (maximum 0.225 ohm with extended mounting pad)
• Contact bounce maximum 1.5 ms (applicable to failure rate level "L")
• Contact stabilization time maximum 2.0 ms (applicable to failure rate levels "M", "P", and "R")
• Overload (high level only): twice rated current, not applicable to AC load ratings
• Operate time: maximum 4.0 ms over full temperature range at rated coil voltage; release time: maximum 2.0 ms over full temperature range at rated coil voltage
• Insulation resistance: minimum 10,000 MΩ at 500V DC, minimum 1,000 MΩ between coil and case at high temperature
• Temperature range: -65°C to +125°C
• Vibration (sinusoidal): per MIL-STD-202 Method 204, maximum contact chatter not to exceed 10 µs for closed contacts, maximum closure time of 1 µs for open contacts
• Vibration (random): per MIL-STD-202 Method 214 Test Condition IG, maximum contact chatter not to exceed 10 µs for closed contacts, maximum closure time of 1 µs for open contacts, applicable to qualification and Group C testing only
• Shock (specified pulse): per MIL-STD-202 Method 213 Test Condition B (75g), maximum contact chatter not to exceed 10 µs for closed contacts, maximum closure time of 1 µs for open contacts
• Resistance to soldering heat: applicable
• Acceleration: applicable
• Salt atmosphere (corrosion): per MIL-STD-750 Method 1041
• Terminal strength: per MIL-STD-202 Method 211
• Pull test: Test Condition A, 1 lb pull force
• Bend test: Test Condition C, 1/2 lb load
• Torsion test: as specified in MIL-PRF-39016
• Solderability: applicable
• Weight: maximum 3.40 g (0.12 oz), maximum 3.45 g (0.129 oz) with extended mounting pad
• Seal: hermetically sealed
• Minimum marking: part number, "J" with date code (e.g., J0430), schematic diagram, manufacturer name or source code