رله‌ رله‌های سیگنال

Product Attributes

Features

• Safety Standard: C-UL TUV CQC
• Contact Gap: 0.15mm Minimum.
• Contact Resistance: Maximum 100 mΩ at initial value. Test Current: 1A, Open Circuit Test Voltage: 6VDC. By using Voltage Drop Method.
• Contact Capacity: 2 Amps at 120VAC Cos Φ = 1. 2 Amps at 24VDC.
• Pull In Voltage: V DC ≤ (Contact operating voltage when voltage is gradually applied. It is 80% of the Rated Voltage) V DC
• Drop Out Voltage: ≥ (Contact breaking voltage when rated voltage is gradually reduced. It is 10% of the Rated Voltage) VDC
• Max. Allowable Voltage: (130% of the Rated Voltage) V DC
• Operate Time: 5 milliseconds Maximum when rated Voltage is applied.
• Release Time: 5 milliseconds Maximum when rated Voltage is suddenly cut off.
• Coil Temperature Rise: 40 ℃ Maximum. Maximum Allowable Voltage is applied to Coil while no load should be applied to Contacts, then the temperature should be measured when the value is stabilized. Environment temperature should not be included in.
• Mechanical Life: 10,000,000 operations Minimum at No Load condition.
• Between Contacts: 400VAC at Test Frequency 50/60 Hz, Leakage Current: 1mA for 1 minute.
• Insulation Resistance: ≥ 100 MΩ Minimum. A Voltage of 500VDC should be applied after which measurement shall be made.
• Operating Temperature Range: -30 to +70 ℃. Operating temperature range is the range of ambient temperature of which the Relay can be operated continuously within operative voltage range of coil (no condensation of water drops under low temperature condition)
• Humidity Range: 35~85% RH.
• Operating Cold Resistance: Relay should be kept in temperature chamber at -30±2 ℃ for two hours that no current or voltage shall be supplied to Relay. Such condition shall be maintained while the rated voltage is supplied to Relay, then the Relay shall operate normally. (No condensation of water drops under low temperature condition)
• Storage Cold Resistance: Relay should be kept in temperature chamber at -30±2 ℃ for 72 hours. Then the Relays shall be maintained at standard atmospheric condition for 1 to 2 hours after which measurement shall be made. Construction, Relay operation, Insulation Resistance and Dielectric Strength shall satisfy the specification requirements. (No condensation of water drops under low temperature condition)
• Operating Heat Resistance: Relay should be kept in temperature chamber at 70±2 ℃ for two hours that rated Voltage should be supplied to Coil while rated Current should be supplied to Contacts. Such condition shall be maintained while the rated voltage is supplied to Relay, then Relay shall operate normally.
• Storage Heat Resistance: Relay should be kept in temperature chamber at 70±2 ℃ for 16 hours. Then the Relays shall be maintained at standard atmospheric condition for 1 to 2 hours after which measurement shall be made. Construction, Relay operation, Insulation Resistance and Dielectric Strength shall satisfy the specification requirements.
• Moisture Resistance: Relay should be kept in temperature chamber at 40±2 ℃ (90~95% RH) for 48 hours. Then the Relays shall be maintained at standard atmospheric condition for 1 to 2 hours after which measurement shall be made. Construction, Relay operation, Insulation Res