رله‌ رله‌ قدرت

Product Attributes

Features

• Safety Certification: C-UL TUV
• Contact Gap: 0.15mm minimum
• Contact Resistance: Initial value max 100mΩ; carry current 1A, open-circuit test voltage: 6VDC; measured by voltage drop method
• Contact Rating: 125VAC CosΦ = 1, rated current 1A; 30VDC, rated current 2A
• Coil Ratings (20℃): 3VDC, 5VDC, 6VDC, 9VDC, 12VDC, 24VDC
• Rated Power Consumption: (±10%), 0.15W/0.2W/0.36W
• Coil Resistance: (Ω±10%), 60/45/25, 167/125/70, 240/180/100, 540/400/220, 960/720/400, 3840/2880/1600
• Must Operate Voltage: ≤(The voltage at which contacts operate when voltage is gradually applied to the relay, 80% of rated voltage) VDC
• Must Release Voltage: ≥(The voltage at which contacts release when rated voltage is gradually decreased, 10% of rated voltage) VDC
• Maximum Allowable Voltage: (130% of rated voltage) VDC
• Operate Time: Max 6 milliseconds at rated voltage applied
• Release Time: Max 4 milliseconds at rated voltage suddenly removed
• Coil Temperature Rise: With maximum allowable voltage applied to coil under no-load condition, the stabilized temperature rise shall not exceed 40℃ (ambient temperature excluded)
• Service Life:
  • Electrical Life: 1A/125VAC CosΦ = 1, min 100,000 operations at rated voltage; 2A/30VDC, min 100,000 operations at rated voltage
  • Mechanical Life: Min 10,000,000 operations under no-load condition
  • Maximum Operating Frequency: Electrical: 30 operations/min; Mechanical: 300 operations/min
• Dielectric Strength:
  • Between contacts: 550VAC, 50/60 Hz, leakage current less than 1mA, for 1 minute
  • Between coil and contacts: 1,000VAC, 50/60 Hz, leakage current less than 1mA, for 1 minute
• Insulation Resistance: ≥100 MΩ at 500VDC applied
• Vibration Test:
  • Vibration I (Durability): De-energized state, double amplitude 1.5mm, frequency swept from 10Hz~55Hz~10Hz within 1 minute. Applied in X, Y, Z directions for 2 hours each, 6 hours total. No abnormality in appearance/construction and electrical function shall meet specification requirements after test
  • Vibration II (Functional): Energized state, double amplitude 1.5mm, frequency swept from 10Hz~55Hz~10Hz within 1 minute. Applied in X, Y, Z directions for 5 minutes each. No malfunction permitted during test (contact open time shall not exceed 1ms). No abnormality in appearance/construction and electrical function shall meet specification requirements after test
• Shock Test:
  • Shock I (Durability): Peak acceleration 1000m/s², coil de-energized, 5 consecutive shocks applied in each of 3 mutually perpendicular axes. No abnormality in appearance/construction and electrical function shall meet specification requirements after test
  • Shock II (Functional): Peak acceleration 100m/s², coil energized, 2 consecutive shocks applied in each of 3 mutually perpendicular axes. No malfunction permitted during test (contact open time shall not exceed 1ms). No abnormality in appearance/construction and electrical function shall meet specification requirements after test
• Temperature Range:
  • Operating Temperature Range: Related content not fully provided in document