اپتوالکترونیک لوازم جانبی اپتوالکترونیک

Product Attributes

Features

• Option C specifies a pin length of 0.20 inches for panel lights mounted in PS90 or PS90T sockets (page 48); the socket includes mounting hardware. Do not select Option W. C and standard pins are not solderable.
• Model 905 has no lens; omit lens diffusion and color (e.g., 905-BG5H-0).
• V = typical luminous intensity, measured at If = 20mA (Ta = 25℃), measured without lens; for low-power LEDs, If = 2mA.
• For use with Model 905 only.
• Refer to the voltage/current chart for design specifications; design current for low-power LEDs is 2mA.
• Ta = 25℃. Voltage "Z" indicates an external resistor is required. Voltages 5H through 60H are DC voltages. For AC operation, insert D after the voltage (e.g., 24HD); D indicates a built-in rectifier, not required for 5H or 120VAC. No DC operation at 120V. No bi-color at AC voltages.
• Omit H when selecting voltage (e.g., 91-RLP12-CWO).
• Select -CW or -NW lens only.
• Select high-intensity LED only.
• Omit lens diffusion when selecting smoked lens (e.g., 91-NWG24H-S0).
• Standard wire total length is 6.0 inches (nominal), strip length is 1.50 inches (nominal), red anode/black cathode, 24AWG TPB UL1061 insulation. Contact factory for other lengths, gauges, and colors.
• Mounting hole diameter for Series 90 panel light sockets: 0.375 inches to 0.385 inches; maximum panel thickness: 0.80 inches.