اپتوالکترونیک لوازم جانبی اپتوالکترونیک

Product Attributes

Features

• Total tolerance of panel and PCB must not exceed 0.3 mm / 0.012 in: T1 + T2 max 0.3 mm
• Minimum board thickness: 1.6 mm / 0.06 in
• Cutout diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
• Orientation of body/fixing ring ZB4 BZ009: ± 2°30' (excluding cutouts marked a and b)
• Tightening torque of screw ZBZ 006: max 0.6 N.m (5.3 lbf.in)
• One ZB4 BZ079 fixing ring/pillar with its fixing screw per 90 mm / 3.54 in horizontal (X) and 120 mm / 4.72 in vertical (Y)
• Fixing to be considered for each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•)
• Adapter (socket) ZBZ 01• has 2 oblong holes for ZBZ 006 screw operation
• Adapter ZBZ 01• has 1 hole of diameter 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centering
• 8 holes of diameter 1.2 mm / 0.05 in
• 1 hole of diameter 2.9 mm ± 0.05 / 0.11 in. ± 0.002 for PCB alignment (with cutout marked a)
• 1 oblong hole for PCB alignment (with cutout marked b)
• 4 holes of diameter 2.4 mm / 0.09 in for snap-fitting into adapter ZBZ 01•