اپتوالکترونیک لوازم جانبی اپتوالکترونیک

Product Attributes

Introduction

ZB4BV05S for pilot lights, Harmony XB4 series, orange, 22mm diameter, with grooved lens, BA9s bulb. Panel cutouts (finished holes, ready for direct mounting) for pushbuttons, switches, and pilot lights. Pushbuttons, switches, and pilot lights for PCB connection. Panel cutout (viewed from installer's side): A: 30mm min (1.18 in) B: 40mm min (1.57 in) PCB cutout (viewed from electrical module side), dimensions in mm: A: 30mm min B: 40mm min Dimensions in inches: A: 1.18 in min B: 1.57 in min General tolerances for panel and PCB: cumulative tolerance must not exceed 0.3mm (0.012 in), i.e. T1 + T2 = 0.3mm. Mounting notes: ● Minimum board thickness: 1.6mm (0.06 in) ● Cutout diameter: 22.4mm ± 0.1 (0.88 in ± 0.004) ● Body/fixing ring ZB4 BZ009 orientation: ±2°30′ (excluding cutouts marked a and b). Tightening torque for ZBZ 006 screw: 0.6N·m max (5.3lbf·in) ● Allow one ZB4 BZ079 fixing ring/pillar and its fixing screw per 90mm (3.54 in) horizontal (X) and 120mm (4.72 in) vertical (Y). Allow for each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•). Fixing centers marked a and b are diagonally opposite and must align with centers marked 4 and 5. (1) Panel (2) PCB Mounting of adapter (socket) ZBZ 01•: ● 1 oblong hole for ZBZ 006 screw operation ● 1 hole diameter 2.4mm ± 0.05 (0.09 in ± 0.002) for centering adapter ZBZ 01• ● 8 holes diameter 1.2mm (0.05 in) ● 1 hole diameter 2.9mm ± 0.05 (0.11 in ± 0.002) for PCB alignment (with cutout marked a) ● 1 oblong hole for PCB alignment (with cutout marked b) ● 4 holes diameter 2.4mm (0.09 in) for snap-fitting adapter ZBZ 01• Electrical composition for codes P1, P3, PF1, PR1, and PF2: lamp block Electrical composition for code P4 Legend: single contact, double contact, lamp block, possible positions