اپتوالکترونیک عدسی ال‌ای‌دی

Product Attributes

Introduction

Harmony XB5 indicator light head, metal, green, diameter 22, for flat lens with integrated LED. Panel cutout for buttons, switches, and indicator lights (finished hole, ready for direct mounting) Connection via screw clamp terminals, plug-in connectors, or PCB (1) Diameter on finished panel or bracket (2) For selector switches and emergency stop buttons, use of anti-rotation plate type ZB5AZ902 is recommended. (3) Recommended diameter 22.5mm (22.3mm, tolerance +0.4mm) / recommended diameter 0.89 in (0.88 in, tolerance +0.016 in) Lug slot details (1) Diameter on finished panel or bracket (2) For selector switches and emergency stop buttons, use of anti-rotation plate type ZB5AZ902 is recommended. (3) Recommended diameter 22.5mm (22.3mm, tolerance +0.4mm) / recommended diameter 0.89 in (0.88 in, tolerance +0.016 in) Buttons, switches, and indicator lights for PCB connection A: min 30mm / min 1.18 in B: min 40mm / min 1.57 in PCB cutout (viewed from electrical module side) dimensions in mm A: min 30mm B: min 40mm Dimensions in inches A: min 1.18 in B: min 1.57 in General tolerances for panel and PCB Cumulative tolerance must not exceed 0.3mm / 0.012 in: Γ1 + T2 max 0.3mm Mounting notes ● Minimum board thickness: 1.6mm / 0.06 in ● Cutout diameter: 22.4mm ± 0.1mm / 0.88 in ± 0.004 in ● Orientation of body / fixing ring ZB5AZ009: ±2°30′ (excluding cutouts marked a and b) Tightening torque of screw ZBZ006: max 0.6N.m (5.3lbf.in) ● Provide one ZB5AZ079 fixing ring / pillar and its fixing screw every 90mm / 3.54 in horizontally (X) and 120mm / 4.72 in vertically (Y). Apply to each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•). Centers marked a and b are diagonally opposite and must be aligned with the markings (1) Head ZB5AD• (2) Panel (2) Nut (4) PCB Mounting of adapter (socket) ZBZ01• ● 12 elongated holes for inserting ZBZ006 screws ● 2 holes diameter 2.4mm ± 0.05mm / 0.09 in ± 0.002 in for centering adapter ZBZ01• ● 3 sets of 8 × diameter 1.2mm / 0.05 in holes ● 4 holes diameter 2.9mm ± 0.05mm / 0.11 in ± 0.002 in for PCB alignment (with cutouts marked a) ● 5 elongated holes for PCB alignment (with cutouts marked b) ● 6 holes diameter 2.4mm / 0.09 in for snap-fitting adapter ZBZ01• Electrical composition for codes P1, P3, PF1, PR1, and PF2 Light module Electrical composition for codes M6 and P2 Legend Single contact Double contact Light module Possible positions