اپتوالکترونیک عدسی ال‌ای‌دی

Product Attributes

Introduction

Indicator head, Harmony XB5, green Ø22 mm grooved lens integrated LED. Panel cutout for pushbuttons, switches, and indicator lights (finished hole, ready to mount). Connection via screw clamp terminals, plug-in connectors, or PCB. (1) Diameter on finished panel or mounting bracket. (2) For selector switches and emergency stop pushbuttons, use of anti-rotation plate ZB5AZ902 is recommended. (3) Recommended Ø22.5 mm (Ø22.3 mm, tolerance +0.4 mm) / Recommended Ø0.89 in (Ø0.88 in, tolerance +0.016 in). Lug groove details: (1) Diameter on finished panel or mounting bracket. (2) For selector switches and emergency stop pushbuttons, use of anti-rotation plate ZB5AZ902 is recommended. (3) Recommended Ø22.5 mm (Ø22.3 mm, tolerance +0.4 mm) / Recommended Ø0.89 in (Ø0.88 in, tolerance +0.016 in). Pushbuttons, switches, and indicator lights for PCB connection. A: min. 30 mm / min. 1.18 in. B: min. 40 mm / min. 1.57 in. PCB cutout (viewed from electrical module side), dimensions in mm: A: min. 30 mm. B: min. 40 mm. Dimensions in inches: A: min. 1.18 in. B: min. 1.57 in. General tolerances for panel and PCB: Cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 max. 0.3 mm. Mounting notes: ● Minimum PCB thickness: 1.6 mm / 0.06 in. ● Cutout diameter: 22.4 mm ±0.1 mm / 0.88 in ±0.004 in. ● Orientation of body/fixing ring ZB5AZ009: ±2°30′ (excluding cutouts marked a and b). Tightening torque for screw ZBZ006: max. 0.6 N·m (5.3 lbf·in). ● Install one ZB5AZ079 fixing ring/post and its fixing screw per 90 mm / 3.54 in horizontal (X) and 120 mm / 4.72 in vertical (Y). Apply to each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•). Centers marked a and b are diagonally opposite and must be aligned with the markings. (1) Head ZB5AD• (2) Panel (3) Nut (4) PCB Mounting of adapter (socket) ZBZ01•: ● 12 elongated holes for ZBZ006 screw access. ● 1 hole Ø2.4 mm ±0.05 mm / 0.09 in ±0.002 in for centering adapter ZBZ01•. ● 3 sets of 8× Ø1.2 mm / 0.05 in holes. ● 1 hole Ø2.9 mm ±0.05 mm / 0.11 in ±0.002 in for PCB alignment (with cutout marked a). ● 1 elongated hole for PCB alignment (with cutout marked b). ● 4 holes Ø2.4 mm / 0.09 in for snap-fitting adapter ZBZ01•. Electrical composition corresponding to codes P1, P3, PF1, PR1, and PF2: lamp module. Electrical composition corresponding to codes M6 and P2. Legend: Single contact Double contact Lamp module Possible positions