اپتوالکترونیک عدسی ال‌ای‌دی

Product Attributes

Introduction

Harmony XB5 indicator light head, metal, orange, diameter 22, for flat lens with integrated LED. Panel cutout for buttons, switches, and indicator lights (finished hole, ready for direct installation). Connection via screw clamp terminals, plug-in connectors, or PCB. (1) Diameter on finished panel or bracket. (2) For selector switches and emergency stop buttons, use of anti-rotation plate type ZB5AZ902 is recommended. (3) Recommended diameter 22.5 mm (22.3 mm, tolerance +0.4) / recommended diameter 0.89 in (0.88 in, tolerance +0.016). Terminal lug slot detail. (1) Diameter on finished panel or bracket. (2) For selector switches and emergency stop buttons, use of anti-rotation plate type ZB5AZ902 is recommended. (3) Recommended diameter 22.5 mm (22.3 mm, tolerance +0.4) / recommended diameter 0.89 in (0.88 in, tolerance +0.016). Buttons, switches, and indicator lights for PCB connection. A: min. 30 mm / min. 1.18 in. B: min. 40 mm / min. 1.57 in. PCB cutout (viewed from electrical module side), dimensions in mm. A: min. 30 mm. B: min. 40 mm. Dimensions in inches. A: min. 1.18 in. B: min. 1.57 in. General tolerances for panel and PCB. Cumulative tolerance must not exceed 0.3 mm / 0.012 in: Γ1 + Τ2 max. 0.3 mm. Installation notes: ● Minimum board thickness: 1.6 mm / 0.06 in. ● Cutout diameter: 22.4 mm ±0.1 / 0.88 in ±0.004. ● Orientation of body/fixing ring ZB5AZ009: ±2°30′ (excluding cutouts marked a and b). Tightening torque of screw ZBZ006: max. 0.6 N·m (5.3 lbf·in). ● One ZB5AZ079 fixing ring/pillar and its fixing screw per 90 mm / 3.54 in horizontal (X) and 120 mm / 4.72 in vertical (Y). Per selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•). Centers marked a and b are diagonally opposite and must be aligned with the markings. (1) Head ZB5AD• (2) Panel (2) Nut (4) PCB Installation of adapter (socket) ZBZ01•: ● 12 elongated holes for ZBZ006 screw access. ● 1 hole, diameter 2.4 mm ±0.05 / 0.09 in ±0.002, for centering of adapter ZBZ01•. ● 3 sets of 8 × holes, diameter 1.2 mm / 0.05 in. ● 1 hole, diameter 2.9 mm ±0.05 / 0.11 in ±0.002, for PCB alignment (with cutout marked a). ● 1 elongated hole for PCB alignment (with cutout marked b). ● 4 holes, diameter 2.4 mm / 0.09 in, for snap-fitting adapter ZBZ01•. Electrical composition corresponding to codes P1, P3, PF1, PR1, and PF2. Lamp module. Electrical composition corresponding to codes M6 and P2. Legend. Single contact. Double contact. Lamp module. Possible positions