اپتوالکترونیک عدسی ال‌ای‌دی

Product Attributes

Introduction

Indicator light head, Harmony XB5, orange, 22 mm diameter with grooved lens integrated LED. Panel cutout for pushbuttons, switches and indicator lights (finished hole, ready for direct mounting), connectable via screw clamp terminals, plug-in connector or PCB.

Features

• Recommended panel or bracket mounting hole diameter: 22.5 mm (22.3 mm, tolerance +0.4 mm) / 0.89 in (0.88 in, tolerance +0.016 in)
• PCB-connected pushbuttons, switches, and indicator lights: dimension A minimum 30 mm / 1.18 in, dimension B minimum 40 mm / 1.57 in
• Total tolerance between panel and PCB must not exceed 0.3 mm / 0.012 in
• Minimum PCB thickness: 1.6 mm / 0.06 in
• Cutout diameter: 22.4 mm ±0.1 mm / 0.88 in ±0.004 in
• Body/fixing ring ZB5AZ009 orientation deviation: ±2°30′ (excluding cutouts marked a and b)
• Maximum tightening torque for screw ZBZ006: 0.6 N·m (5.3 lbf·in)
• One ZB5AZ079 fixing ring/pillar and its fixing screw per 90 mm / 3.54 in horizontal (X) and 120 mm / 4.72 in vertical (Y)
• Adapter (socket) ZBZ01•: 12 elongated holes for screw ZBZ006 operation
• 2 holes, diameter 2.4 mm ±0.05 mm / 0.09 in ±0.002 in, for adapter ZBZ01• centering
• 3 sets of 8× diameter 1.2 mm / 0.05 in holes
• 4 holes, diameter 2.9 mm ±0.05 mm / 0.11 in ±0.002 in, for PCB alignment (cutouts marked a)
• 1 elongated hole for PCB alignment (cutout marked b)
• 4 holes, diameter 2.4 mm / 0.09 in, for adapter ZBZ01• snap-in mounting