ارسال سریع به سراسر ایران پشتیبانی 24/7
ADAFRUIT INDUSTRIES 5576

اپتوالکترونیک ال ای دی آدرس‌پذیر و ویژه

ADAFRUIT INDUSTRIES 5576

Manufacturer Adafruit Industries
Mfr. Part Number 5576
Electland Part Code 206266
Electland Part Number NYE_5576
Category LED Addressable, Specialty
Description Buffer, Non-Inverting 1 Element 1 Bit per Element 3-State Output 5-TSSOP
Datasheet Download

Product Attributes

Category Optoelectronics LED Addressable, Specialty
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Operating Temperature -40°C ~ 125°C (TA)
Voltage - Supply 0.8V ~ 3.6V
Output Type 3-State
Number of Bits per Element 1
Illumination Color Blue
Number of Elements 1
Supplier Device Package 5-TSSOP
Logic Type Buffer, Non-Inverting
Current - Output High, Low 4mA, 4mA
ReachStatus REACH Unaffected
RohsStatus ROHS3 Compliant
MoistureSensitivityLevel 1 (Unlimited)
ExportControlClassNumber EAR99
HtsusCode 8542.39.0070
Weight 0.5g

Introduction

Adding LEDs to anything makes it 5 times better — that's a scientific fact! But when you have LEDs, you've got wires and power supplies, and all of that is pretty annoying. What if you could have LEDs that light up without any wires, soldering, or battery packs? Sounds like magic! That's why this kit of 10 large wireless LEDs is so clever. When paired with the large inductive coil kit, they use electromagnetic fields and inductive coupling to transfer power through the air, lighting up LEDs soldered onto the coil. Each order includes ten blue large LED inductors. Compared to the smaller blue wireless LEDs, the large ones work at greater distances, especially when used with the large coil. This product includes only the 10-pack of large wireless LED inductors. The large inductive coil kit is sold separately. Inductive charging is a way to power devices without a direct wire connection. Most people have seen inductive charging in rechargeable electric toothbrushes: you may have noticed that they charge by being placed in a cradle, with no direct plug. These chargers work by taking a power transformer and splitting it in half — an AC waveform is generated into one coil and coupled to a second coil. In this product, one coil forms the "primary" of the power charger. Each individual LED then has a smaller coil on its back. When the two are coupled, power transfers from the coil to the LED, and it lights up. You can have a large number of LEDs, all floating in different 3D positions above or below the coil. You can also orient them in different directions, though you'll get the best efficiency and power transfer when the two coils are aligned. You can also position the LEDs slightly outside the main loop, but again, they won't be as bright as when they're centered directly over it.

Features

  • Single LED inductor: height 6.1mm, diameter 5mm
  • Approximate working distance with large ring, LED centered and coaxially aligned: 10cm
  • Approximate working distance with small ring, LED centered and coaxially aligned: 6cm

In-Stock Suppliers

NoyanElectronic
0 in stock
Supplier Part Number: NYE_5576

1 1
QTY USD TOMAN
1+$3.691,024,540 تومان
200+$1.48410,930 تومان
500+$1.43397,050 تومان
1000+$1.4388,720 تومان

Qty in reel: 1pcs/reel