اپتوالکترونیک فرستنده‌ فیبر نوری گسسته

Product Attributes

Introduction

The HFBR-0508Z Series consists of a fiber-optic transmitter and receiver operating at a 650 nm wavelength (red). The HFBR-1528Z transmitter is an LED in a low cost plastic housing designed to efficiently couple power into 200μm diameter Hard Clad Silica (HCS) and 1 mm diameter Plastic optical fiber (POF). The HFBR-2528Z receiver incorporates a PIN detector and digital output IC compatible with CMOS and TTL logic families. HFBR-0508Z links operate from DC to 10 MBd at distances up to 50 meters with 1 mm POF and up to 500 meters with 200μm HCS. No minimum link distances are required when using recommended circuits, simplifying design. Versatile Link components can be interlocked (N-plexed together) to minimize space and to provide dual connections with the duplex connectors. Up to eight packages can be interlocked and inserted into a printed circuit board. POF and HCS are available in pre-connectored lengths or can be easily field-terminated. A single transmitter drive current for POF and HCS allows both fibers to be used with a single design.

Features

• RoHS-compliant
• Data transmission at signal rates of dc to 10 MBd
• Up to 50 meters distances with 1 mm Plastic Optical Fiber (POF)
• Up to 500 meters distances with 200μm Hard Clad Silica (HCS)
• Wide dynamic range receiver allows operation from zero to maximum link distance with a single transmitter drive current
• Link distances specified for variations in temperature, power supply, and fiber attenuation
• DC coupled receiver with CMOS/TTL output for easy designs: No data encoding or digitizing circuitry required
• Pulse width distortion (PWD) controlled to limit distortion from low duty cycle or burst mode data
• High noise immunity
• Compatible with Avago’s versatile link family of connectors, for easy termination of fiber

Applications

• Industrial control and factory automation
• Serial field buses
• Intra-system links; board-to-board, rack-to-rack
• Extension of RS-232, RS-485
• Elimination of ground loops
• High voltage isolation
• Reduces voltage transient susceptibility