موتور، عملگر، سلونوئید و درایور برد و ماژول درایور موتور

Product Attributes

Introduction

Motoron M3S550 Triple Motor Controller Arduino Shield makes it easy to control DC motors via I²C from an Arduino or Arduino-compatible board. Each module can independently control up to three motors, and multiple shields can be stacked on the same Arduino for projects requiring control of more motors. The M3S550 supports motor supply voltages from 1.8V to 22V and can deliver up to 1.7A continuous output current per channel. This version is the motor controller board only, with no headers or terminal blocks included.

Features

• Three-channel motor control; each Motoron independently controls up to three bidirectional brushed DC motors
• Wide motor supply voltage range: 1.8V to 22V (maximum)
• Maximum output current per motor: 1.7A continuous, 5A peak (duration less than 1 second)
• Motor supply reverse voltage protection (down to -20V)
• Logic voltage input (IOREF) range: 3.1V to 5.5V
• Logic voltage: typical 3.3V, but lower if IOREF is below 3.3V (generated by LDO powered from IOREF)
• Compatible with 3.3V and 5V I²C buses (maximum signal voltage 6.5V)
• Control interface: I²C
• I²C clock speed: up to 400 kHz
• Optional cyclic redundancy check
• Configurable motion parameters: maximum forward/reverse acceleration/deceleration, forward/reverse starting speed, forward/reverse direction change delay
• PWM frequency: eight options from 1 kHz to 80 kHz
• Command timeout stops motors when Arduino stops responding
• Configurable automatic error response
• Motor supply voltage measurement
• Optional pin for powering Arduino from unregulated motor supply (regulator not included)
• Two status LEDs
• Motor direction indicator LEDs
• Motoron Arduino library simplifies use with Arduino or compatible boards
• Comprehensive user guide

Applications

• Arduino or Arduino-compatible board
• A-Star 32U4 Prime development board