ایزولاتور ایزولاتور- درایور گیت

POWER INTEGRATIONS SID1132KQ

Manufacturer	POWER INTEGRATIONS
Mfr. Part Number	SID1132KQ
Electland Part Code	178029
Electland Part Number	NYE_SID1132KQ
Category	Isolators - Gate Drivers
Description	2.5A Gate Driver Magnetic Coupling 5000Vrms 1 Channel eSOP-R16B
Datasheet	Download

Product Attributes

Category	Isolators Isolators - Gate Drivers
Technology	Magnetic Coupling
Number of Channels	1
Voltage - Isolation	5000Vrms
Common Mode Transient Immunity (Min)	50kV/µs (Typ)
Propagation Delay tpLH / tpHL (Max)	340ns, 330ns
Rise / Fall Time (Typ)	450ns, 450ns
Current - Output High, Low	1.2A, 1.3A
Current - Peak Output	2.5A
Voltage - Output Supply	22V ~ 28V
grade	Automotive
Qualification	AEC-Q100
Operating Temperature	-40℃~+125℃
Mounting Type	Surface Mount
Package / Case	16-PowerSOIC (0.350", 8.89mm Width), 15 Leads
Supplier Device Package	eSOP-R16B
Voltage - Supply	4.75V~5.25V
Features	Under Voltage Protection;Overcurrent Protection;Short Circuit Protection
Current - Output Low(IOL)	1.3A
Current - Output High(IOH)	2.6A
Propagation Delay(tpd)	-;-
Rise Time	450ns
Fall Time	18ns
Load Type	MOSFET;IGBT
Packaging	eSOP-R16B
Tariff Active	True
ReachStatus	REACH Unknown
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	EAR99
HtsusCode	8542.39.0070
Weight	0.5g

Introduction

The SID11x2KQ is a single channel IGBT and MOSFET driver in an eSOP package. Reinforced galvanic isolation is provided by innovative solid insulator FluxLink technology. 8 A peak output drive current enables the product to drive IGBTs and MOSFETs up to 600 A (typical) without any additional active components. For gate drive requirements that exceed the stand-alone capability of the SID11x2KQ’s, an external amplifier (booster) may be added. Stable positive and negative voltages for gate control are provided by one unipolar isolated voltage source. Additional features such as short-circuit protection (DESAT) with Advanced Soft Shut Down (ASSD), undervoltage lock-out (UVLO) for primary-side and secondary-side and rail-to-rail output with temperature and process compensated output impedance guarantee safe operation even in harsh conditions. Controller (PWM and fault) signals are compatible with 5 V CMOS logic, which may also be adjusted to 15 V levels by using external resistor divider.

Features

Split outputs providing up to 8 A peak drive current
Integrated FluxLink™ technology providing safe isolation between primary-side and secondary-side
Rail-to-rail stabilized output voltage
Unipolar supply voltage for secondary-side
Suitable for 600 V / 650 V / 1200 V IGBT and MOSFET switches
Up to 75 kHz switching frequency
Low propagation delay time 260 ns
Propagation delay jitter ±5 ns
-40 °C to 125 °C operating ambient temperature
High common-mode transient immunity
eSOP package with 9.5 mm creepage and clearance
Undervoltage lock-out (UVLO) protection for primary and secondary-side and fault feedback
Short-circuit protection using VCESAT monitoring and fault feedback
Advanced Soft Shut Down (ASSD)
100% production partial discharge test
100% production HIPOT compliance testing at 6 kV RMS 1 s
Reinforced insulation meets VDE 0884-10 (pending)
AEC Q -100 qualified reaching automotive grade level 1
Halogen free and RoHS compliant