ارسال سریع به سراسر ایران پشتیبانی 24/7
MAXIM MAX9892ERT+T

مدار مجتمع (آی سی) آی‌سی صوتی ویژه

MAXIM MAX9892ERT+T

Manufacturer MAXIM
Mfr. Part Number MAX9892ERT+T
Electland Part Code 171491
Electland Part Number NYE_MAX9892ERT+T
Category Audio Special Purpose
Description Audio Noise Reduction 2 Channel 6-UCSP
Datasheet Download

Product Attributes

Category Integrated Circuits (ICs) Audio Special Purpose
function Noise Reduction
Applications Consumer Audio
Number of Channels 2
interface Analog
Voltage - Supply 1.7V~5.5V
Operating Temperature -40℃~+85℃
specifications 35dB
Mounting Type Surface Mount
Package / Case 6-WFBGA, CSPBGA
Supplier Device Package 6-UCSP
Features Mute control
Packaging UCSP-6
ReachStatus REACH Unaffected
RohsStatus ROHS3 Compliant
MoistureSensitivityLevel 1 (Unlimited)
ExportControlClassNumber EAR99
HtsusCode 8542.39.0090
Weight 0.0055g

Introduction

The MAX9892 is an audio click-and-pop eliminator for portable multimedia devices. Operating from a 1.7V to 3.6V supply, the MAX9892 connects to the output of the existing system amplifier and provides a low-impedance path to ground during startup and shutdown. The inputs INL and INR accept voltage swings from VDD to 5.5V below VDD. The power-up and power-down transients are shunted to ground to prevent clicks and pops from becoming audible. The MAX9892 features two low-impedance analog switches controlled by MUTE that opens and closes the switches. The switches are open during normal operation and have no impact on the output signal. During startup and shutdown of the amplifier, the MAX9892 can be activated to short the outputs to ground and prevent clicks and pops from pulling current through the headphones. The MAX9892 is available in 6-bump UCSP (1mm × 1.52mm × 0.6mm) and 6-pin μDFN (2mm × 2mm × 0.75mm) packages. The MAX9892 is specified over the -40°C to +85°C temperature range. The MAX9892 is the second-generation click-and-pop eliminator designed to be used with conventional headphone amplifiers. The MAX9892 works by adding a low-impedance current path from the headphone side of the DC-blocking capacitor to ground. Drive MUTE low when turning off the amplifier, and high when enabling the amplifier. A short turn-on time allows the switches in the MAX9892 to close before the DC-blocking capacitors have significantly discharged, eliminating clicks and pops at amplifier turn-off. An adjustable turn-off time allows the delay to be set to mask all clicks and pops during amplifier turn-on. The MAX9892 features a SET input that allows the turnoff time to be adjusted from 1ms to 1000ms to match the click-and-pop profile of the amplifier startup.

Features

  • Distortion-Free, Click-and-Pop Elimination
  • Less than 1μA Supply Current
  • 1.7V to 3.6V Single-Supply Operation
  • Tiny Packages: 6-Bump UCSP (1mm × 1.52mm × 0.6mm), 6-Pin μDFN (2mm × 2mm × 0.75mm)

Applications

  • Mobile Phones
  • Smart Phones
  • Mobile Internet Devices
  • Portable Gaming Consoles
  • Portable Media Players
  • Notebook Computers

In-Stock Suppliers

NoyanElectronic
0 in stock
Supplier Part Number: NYE_MAX9892ERT+T

1 1
QTY USD TOMAN
1+$0.6471179,670 تومان
200+$0.258371,720 تومان
500+$0.249469,250 تومان
1000+$0.245668,190 تومان

Qty in reel: 2500pcs/reel