برد توسعه، کیت‌ و پروگرامر آداپتور و سوکت پروگرامر

Product Attributes

Features

• Modified Harvard architecture
• C compiler optimized instruction set architecture
• 83 base instructions with flexible addressing modes
• 24-bit wide instructions, 16-bit wide data path
• 12 Kbytes on-chip Flash program space
• 512 bytes on-chip data RAM
• 16x16-bit working register array
• Up to 30 MIPS operation:
  • Dual Internal RC - 9.7 and 14.55 MHz (±1%) Industrial Temp
  • 6.4 and 9.7 MHz (±1%) Extended Temp
  • 32X PLL with 480 MHz VCO
  • PLL inputs ±3%
  • External EC clock 6.0 to 14.55 MHz
  • HS Crystal mode 6.0 to 14.55 MHz
• 32 interrupt sources
• Three external interrupt sources
• 8 user-selectable priority levels for each interrupt
• 4 processor exceptions and software traps
• Modulo and Bit-Reversed modes
• Two 40-bit wide accumulators with optional saturation logic
• 17-bit x 17-bit single-cycle hardware fractional/ integer multiplier
• Single-cycle Multiply-Accumulate (MAC) operation
• 40-stage Barrel Shifter
• Dual data fetch
• High-current sink/source I/O pins: 25 mA/25 mA
• Three 16-bit timers/counters; optionally pair up 16-bit timers into 32-bit timer modules
• One 16-bit Capture input functions
• Two 16-bit Compare/PWM output functions - Dual Compare mode available
• 3-wire SPI modules (supports 4 Frame modes)
• I²C module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
• UART Module:
  • Supports RS-232, RS-485 and LIN 1.2
  • Supports IrDA with on-chip hardware endec
  • Auto wake-up on Start bit
  • Auto-Baud Detect
  • 4-level FIFO buffer
• Four PWM generators with 8 outputs
• Each PWM generator has independent time base and duty cycle
• Duty cycle resolution of 1.1 ns at 30 MIPS
• Individual dead time for each PWM generator:
  • Dead-time resolution 4.2 ns at 30 MIPS
  • Dead time for rising and falling edges
• Phase-shift resolution of 4.2 ns @ 30 MIPS
• Frequency resolution of 8.4 ns @ 30 MIPS
• PWM modes supported:
  • Complementary
  • Push-Pull
  • Multi-Phase
  • Variable Phase
  • Current Reset
  • Current-Limit
• Independent Current-Limit and Fault Inputs
• Output Override Control
• Special Event Trigger
• PWM generated ADC Trigger
• 10-bit resolution
• 2000 Ksps conversion rate
• Up to 12 input channels
• “Conversion pairing” allows simultaneous conversion of two inputs (i.e., current and voltage) with a single trigger
• PWM control loop:
  • Up to six conversion pairs available
  • Each conversion pair has up to four PWM and seven other selectable trigger sources
• Interrupt hardware supports up to 1M interrupts per second
• Four Analog Comparators:
  • 20 ns response time
  • 10-bit DAC reference generator
  • Programmable output polarity
  • Selectable input source
  • ADC sample and convert capable
• PWM module interface
  • PWM Duty Cycle Control
  • PWM Period Control
  • PWM Fault Detect
• Special Event Trigger
• PWM-generated ADC Trigger
• Enhanced Flash program memory:
  • 10,000 erase/write cycle (min.) for industrial temperature range, 100k (typical)
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
• Fail-Safe clock monitor operation
• Detects clock failure and switches to on-chip low power RC oscillator
• Programmable code protection
• In-Circuit Serial Programming (ICSP)
• Selectable Power Management modes - Sleep, Idle and Alternate Clock modes
• Low-power, high-speed Flash technology
• 3.3V and 5.0V operation (±10%)
• Industrial and Extended temperature ranges
• Low power consumption