برد توسعه، کیت‌ و پروگرامر آداپتور و سوکت پروگرامر

Product Attributes

Introduction

The STK600 is a complete starter kit and development system for the AVR Flash microcontroller. It allows designers a quick start in developing code on the AVR device, combined with advanced features for using the starter kit to prototype and test new designs.

Features

• Microchip Studio/AVR Studio 5/AVR Studio 4/AVR32 Studio
• USB Interface to PC for Programming and Control
• Powered from the USB Bus or an External 10 - 15V DC Power Supply
• Adjustable Target VCC (0 - 5.5V)
• Two Adjustable Reference Voltages with High Accuracy (0 - 5.0V, 10 mV res.)
• Clock Oscillator, Adjustable On - The - Fly from Microchip Studio (0 - 50 MHz, 0.1% res.)
• Serial In - System Programming (ISP) of tinyAVR and megaAVR Devices
• PDI Programming of AVR XMEGA Devices
• JTAG Programming of megaAVR, AVR XMEGA, and AVR UC3 Devices
• aWire Programming of AVR UC3 Devices
• ISP and JTAG Programming of AVR Devices in External Target Systems
• Flexible Routing and Socket Card System for Easy Mounting of all Supported Devices
• Eight Push Buttons for General Use
• Eight LEDs for General Use
• All AVR I/O Ports are Easily Accessible through Pin Header Connectors
• Expansion Connectors for Plug - In Modules and Prototyping Area
• On - Board 4 Mb DataFlash for Nonvolatile Data
• USB mini - AB (On - The - Go) Connector for AVR Devices with USB
• PHY and DSUB - 9 Connector for RS - 232 Interface
• PHY and DSUB - 9 Connector for CAN Bus
• PHY and Header for LIN Bus
• Device Board with an ATmega2560 AVR Microcontroller Included