حفاظت مدار جافیوز(پایه فیوز)

EATON HPS-RR

Manufacturer	EATON
Mfr. Part Number	HPS-RR
Electland Part Code	121122
Electland Part Number	NYE_HPS-RR
Category	Fuseholders
Description	Linear Voltage Regulator IC Positive Fixed 1 Output 300mA 4-X2SON (1x1)
Datasheet	Download

Product Attributes

Category	Circuit Protection Fuseholders
Mounting Type	Surface Mount
Package / Case	4-XDFN Exposed Pad
Operating Temperature	-40°C ~ 125°C (TJ)
Output Type	Fixed
Supplier Device Package	4-X2SON (1x1)
Output Configuration	Positive
Voltage - Input (Max)	5.5V
Number of Regulators	1
Voltage - Output (Min/Fixed)	1.8V
Voltage Dropout (Max)	0.2V @ 300mA
Current - Output	300mA
Current - Quiescent (Iq)	141 µA
PSRR	60dB ~ 45dB (1kHz ~ 1MHz)
Control Features	Enable
Protection Features	Over Current, Over Temperature, Under Voltage Lockout (UVLO)
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	1 (Unlimited)
ExportControlClassNumber	EAR99
HtsusCode	8542.39.0090
Weight	0.5g

Introduction

Panel-mount fuse holders for 13/32×15/16-inch to 1 1/16-inch and SC and CC class fuses. The fuse holder is panel-mount type, UL Listed (Listing No. IZLT2, File No. E14853), CSA Certified (Class 6225-01, File No. 47235), with a flammability rating of UL 94 HB. Electrical ratings: without UL Listing or CSA Certification, maximum current is 20A with quick-connect terminals; HPS models are rated 25A under CSA standards. For maximum panel thickness with the mounting flange in front of the panel, assuming Pollution Degree 3 per UL 840 (conductive pollution, or dry non-conductive pollution that becomes conductive due to expected condensation), excluding any sealing gasket; if the fuse holder load terminals are fully insulated (using UL-recognized VW-1 rated insulating heat shrink tubing), the intended environment is Pollution Degree 1 or 2, and the panel is a non-conductive material, a thicker panel may be used. Pollution Degree 2 normally has only non-conductive pollution, but temporary conductivity may occur due to condensation; Pollution Degree 1 has no pollution or only dry non-conductive pollution with no effect. With the mounting flange behind the panel, the maximum panel thickness is 5.08 mm/0.200 inch (flush with the knob ferrule).

Features

Snap-in knob
1/16-inch quick-connect/solder terminal combination (standard solder terminals provided)
Fuse holders in -EE, -JJ, -FF, and -RR versions are UL listed for applications requiring branch circuit protection
Do not apply pulling force to the line (rear) terminals