مدار مجتمع (آی سی) آی‌سی حافظه تراشهٔ حافظه

MXIC MX30LF1GE8AB-TI

Manufacturer	MXIC
Mfr. Part Number	MX30LF1GE8AB-TI
Electland Part Code	1030713
Electland Part Number	NYE_MX30LF1GE8AB-TI
Category	Memory (ICs)
Description	FLASH - NAND Memory IC 1Gbit Parallel 20 ns 48-TSOP

Category	Integrated Circuits (ICs) Memory Memory (ICs)
Package / Case	48-TFSOP (0.724", 18.40mm Width)
Mounting Type	Surface Mount
Operating Temperature	-40℃~+85℃
Technology	FLASH - NAND
Voltage - Supply	2.7V~3.6V
interface	Parallel
Features	Read buffer function;Software reset function;Bad block management function;ECC error correction function;OTP region write protection and lock function;Hardware write protection function
Memory Size	1Gbit
Data Retention - TDR (Year)	10 years
Supplier Device Package	48-TSOP
Memory Type	Non-Volatile
Memory Format	FLASH
Memory Organization	128M x 8
Memory Interface	Parallel
Write Cycle Time - Word, Page	20ns
Access Time	20 ns
Program / Erase Cycles	100,000 cycles
Block Erase Time(tBE)	1ms
Page Programming Time (Tpp)	20ns
Standby Supply Current	50uA
Packaging	TFSOP-48-18.4mm
Tariff Active	False
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	3A991B1A
HtsusCode	8542.32.0071
Weight	0.984g

1G-bit SLC NAND Flash
Bus: x8
Page size: (2048 + 64) byte
Block size: (128K + 4K) byte
ONFI 1.0 compliant
Multiplexed Command/Address/Data
User Redundancy: 64-byte attached to each page
Fast Read Access
Latency of array to register: 25us
Sequential read: 20ns
Cache Read Support
Page Program Operation
Page program time: 300us (typ.)
Cache Program Support
Block Erase Operation
Block erase time: 1ms (typ.)
Single Voltage Operation: VCC: 2.7 - 3.6V
Low Power Dissipation
Max. 30mA Active current (Read/Program/Erase)
Sleep Mode: 50uA (Max) standby current
Hardware Data Protection: WP# pin
Block Protection: PT (Protection) pin: active high at power-on, which protects the entire chip. The pin has an internal weak pull down.
Temporary protection/un-protection function (enabling by PT pin)
Solid protection (enabling by PT pin)
Device Status Indicators: Ready/Busy