مدار مجتمع (آی سی) آی‌سی حافظه تراشهٔ حافظه

ONSEMI NV25640DTHFT3G

Manufacturer	onsemi
Mfr. Part Number	NV25640DTHFT3G
Electland Part Code	1029735
Electland Part Number	NYE_NV25640DTHFT3G
Category	Memory (ICs)
Description	EEPROM Memory IC 64Kbit SPI 10 MHz 40 ns 8-TSSOP

Product Attributes

Category	Integrated Circuits (ICs) Memory Memory (ICs)
Package / Case	8-TSSOP (0.173", 4.40mm Width)
Mounting Type	Surface Mount
Operating Temperature	-40℃~+150℃
Technology	EEPROM
Voltage - Supply	2.5V~5.5V;3mA
interface	SPI
Features	Hardware write protection function;Built-in power-on reset (POR);Built-in error correction code (ECC) function;Built-in write enable latch (WEL)
grade	Automotive
Clock Frequency	10MHz
Memory Size	64Kbit
Data Retention - TDR (Year)	200 Years
Write Cycle Endurance	4,000,000 Cycles
Supplier Device Package	8-TSSOP
Qualification	AEC-Q100
Memory Type	Non-Volatile
Memory Format	EEPROM
Memory Organization	8K x 8
Memory Interface	SPI
Write Cycle Time - Word, Page	4ms
Access Time	40 ns
Write Cycle Time(tWC)	4ms
Standby Supply Current	10uA
Packaging	TSSOP-8
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	1 (Unlimited)
ExportControlClassNumber	EAR99
HtsusCode	8542.32.0051
Weight	0.116g

Introduction

NV25080, NV25160, NV25320, NV25640 are a EERPOM Serial 8/16/32/64−Kb SPI Automotive Grade 0 devices internally organized as 1K/2K/4K/8Kx8 bits. It features a 32−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS (overline)) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected.

Features

Automotive AEC−Q100 Grade 0 (-40℃ to +150℃, Qualified)
2.5 V to 5.5 V Supply Voltage Range
10 MHz SPI Compatible
SPI Modes (0,0) & (1,1)
32−byte Page Write Buffer
Self−timed Write Cycle
Hardware and Software Protection
Additional Identification Page with Permanent Write Protection
NV Prefix for Automotive and Other Applications Requiring Site and Change Control
Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array
Low Power CMOS Technology
Program/Erase Cycles:
- 4,000,000 at 25℃
- 1,200,000 at +85℃
- 600,000 at +125℃
- 300,000 at +150℃
200 Year Data Retention
SOIC, TSSOP 8−lead Packages
This Device is Pb−Free, Halogen Free/BFR Free, and RoHS Compliant