مدار مجتمع (آی سی) آی‌سی حافظه تراشهٔ حافظه

MXIC MX25V8035FZNI

Manufacturer	MXIC
Mfr. Part Number	MX25V8035FZNI
Electland Part Code	1029312
Electland Part Number	NYE_MX25V8035FZNI
Category	Memory (ICs)
Description	FLASH - NOR Memory IC 8Mbit SPI 104 MHz 8-WSON (6x5)

Product Attributes

Category	Integrated Circuits (ICs) Memory Memory (ICs)
Package / Case	8-WDFN Exposed Pad
Mounting Type	Surface Mount
Operating Temperature	-40℃~+85℃
Technology	FLASH - NOR
Voltage - Supply	2.3V~3.6V
interface	SPI
Clock Frequency	104MHz
Memory Size	8Mbit
Data Retention - TDR (Year)	20 Years
Supplier Device Package	8-WSON (6x5)
Memory Type	Non-Volatile
Memory Format	FLASH
Memory Organization	2M x 4, 4M x 2, 8M x 1
Memory Interface	SPI
Write Cycle Time - Word, Page	100µs, 4ms
Program / Erase Cycles	100,000 cycles
Page Programming Time (Tpp)	800us
Packaging	WSON-8-EP(5x6)
Tariff Active	False
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	3 (168 Hours)
ExportControlClassNumber	3A991B1B1
HtsusCode	8542.32.0071
Weight	0.088g

Introduction

MX25V8035F is 8Mb bits Serial NOR Flash memory

Features

2.3V - 3.6V for Read, Erase and Program Operations
Unique ID and Secure OTP Support
Multi I/O Support - Single I/O, Dual I/O and Quad I/O
Program Suspend/Resume & Erase Suspend/Resume
Supports Serial Peripheral Interface -- Mode 0 and Mode 3
8,388,608x1 bit structure or 4,194,304x2 bits (two I/O mode) structure or 2,097,152x4 bits (four I/O mode) structure
Equal Sectors with 4K byte each, or Equal Blocks with 32K/64K byte each - Any Block can be erased individually
Single Power Supply Operation - Operation Voltage: 2.3V - 3.6V for Read, Erase and Program Operations
Latch-up protected to 100mA from -1V to Vcc +1V
High Performance - Fast read - 1 I/O: 104MHz with 8 dummy cycles - 2 I/O: 104MHz with 4 dummy cycles, equivalent to 208MHz - 4 I/O: 104MHz with 2+4 dummy cycles, equivalent to 416MHz - Fast program and erase time - 8/16/32/64 byte Wrap-Around Burst Read Mode
Low Power Consumption
Minimum 100,000 erase/program cycles
20 years data retention
Input Data Format - 1-byte Command code
Advanced Security Features - Block lock protection The BP0 - BP3 status bit defines the size of the area to be software protection against program and erase instructions
Additional 8K bits secured OTP - Features unique identifier. - Factory locked identifiable and customer lockable
Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector or block - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first)
Status Register Feature
Command Reset
Program/Erase Suspend and Program/Erase Resume
Electronic Identification - JEDEC 1-byte manufacturer ID and 2-byte device ID - RES command for 1-byte Device ID - REMS command for 1-byte manufacturer ID and 1-byte device ID
Support Serial Flash Discoverable Parameters (SFDP) mode
Support Unique ID
SCLK Input - Serial clock input
SI/SIO0 - Serial Data Input or Serial Data Input/Output for 2x1/0 read mode and 4x1/0 read mode
SO/SIO1 - Serial Data Output or Serial Data Input/Output for 2x1/0 read mode and 4x1/0 read mode
WP#/SIO2 - Hardware write protection or serial data Input/Output for 4x1/0 read mode
HOLD#/SIO3 - HOLD feature, to pause the device without deselecting the device or Serial input & Output for 4x1/0 read mode
PACKAGE - 8-pin SOP (150mil/200mil) - 8-land USON (2x3mm) - 8-land WSON (6x5mm) - All devices are RoHS Compliant and Halogen-free