سنسور و مبدل سنسور موقعیت اندازه‌گیری زاویه و موقعیت خطی

OSI OPTOELECTRONICS, INC. SL3-1

Manufacturer	OSI Optoelectronics, Inc.
Mfr. Part Number	SL3-1
Electland Part Code	1006899
Electland Part Number	NYE_SL3-1
Category	Angle, Linear Position Measuring
Description	Diode 100 V 3A Surface Mount DO-214AC (SMA)

Product Attributes

Category	Sensors, Transducers Position Sensors Angle, Linear Position Measuring
Technology	Schottky
Mounting Type	Surface Mount
Package / Case	DO-214AC, SMA
Supplier Device Package	DO-214AC (SMA)
Current - Reverse Leakage @ Vr	500 µA @ 100 V
Voltage - Forward (Vf) (Max) @ If	600 mV @ 3 A
Voltage - DC Reverse (Vr) (Max)	100 V
Current - Average Rectified (Io)	3A
Speed	Fast Recovery =< 500ns, > 200mA (Io)
Operating Temperature - Junction	-55°C ~ 150°C
Packaging	TO-5
ReachStatus	REACH Unaffected
RohsStatus	ROHS3 Compliant
MoistureSensitivityLevel	1 (Unlimited)
ExportControlClassNumber	EAR99
HtsusCode	8541.10.0080
Weight	0.5g

Introduction

Superlinear position sensors employ advanced lateral-effect technology to provide a continuous analog output proportional to the displacement of the light spot centroid from the center across the active area. As continuous position sensors, these detectors offer unmatched performance: position accuracy up to 99% within 64% of the sensing area. This accuracy is achieved through lateral-effect technology, whereby the detector is fabricated with two separate resistive layers — one on the top of the chip and one on the bottom. These sensors can be used for one-dimensional or two-dimensional position measurements. To achieve optimal current linearity at high light levels, a reverse bias should be applied to these detectors. The maximum recommended incident power density for lateral-effect PSDs is 1 mW/cm². For best performance, the incident beam should be perpendicular to the active area with a spot diameter less than 1 mm.